Is the DENSO 23670-11010 compatible with the Toyota Hilux (GUN125/GUN126)?

Yes. The DENSO 23670-11010 is a direct replacement diesel injector for the Toyota Hilux (GUN125/GUN126) 2.8 D-4D and the other listed applications. Always confirm fitment by engine code or vehicle registration before ordering.

Does the DENSO 23670-11010 require injector coding?

No injector coding is required for the DENSO 23670-11010 on most applications. Always follow the manufacturer's fitting procedure.

Is the 23670-11010 supplied tested?

Yes. Every DENSO 23670-11010 is OEM bench-tested and calibrated to manufacturer tolerances before dispatch.

Is a warranty included with the 23670-11010?

Yes. The DENSO 23670-11010 includes a 12 months warranty as standard, with free UK delivery.

Is an exchange or core return required?

No core exchange is required for the DENSO 23670-11010. The price shown is the full price — nothing further to pay or return.

What engines use the 2367011010 injector?

The 2367011010 injector is used in 1GD-FTV engine codes.

What are symptoms of a failing 2367011010 injector?

Common symptoms of a failing 2367011010 injector include hard starting, rough idle, excessive black or white smoke, engine misfires, poor fuel economy, and loss of power under load. A professional leak-off test can confirm whether the injector needs replacing.

How much does it cost to replace the 2367011010 injector?

A remanufactured DENSO 2367011010 injector typically costs between £210 and £210. Labour costs vary by vehicle but usually add £100–£250 per injector. All our remanufactured injectors come with a 12-month warranty.

Zoom1 / 4In Stock

Need Help Confirming Fitment?

Not sure this injector fits your vehicle? Check using your registration number before ordering.

Engine Code or Cross Reference

DENSO 23670-11010 Diesel Injector

DENSO

Part No: 23670-11010

·Trade & Garage Friendly

Not 100% sure? or call us.

In Stock — Ships within 24 hours

The DENSO 23670-11010 diesel injector is a remanufactured common-rail injector for 2.8L D-4D engines. DENSO 23670-11010 remanufactured common-rail diesel injector for Toyota 2.8 D-4D (1GD-FTV) engines — Hilux (GUN125/126), Fortuner (GUN156), Land Cruiser Prado (GDJ150), Hiace.

£210inc. VAT

(per injector)

All prices are shown in GBP (£). International customers are securely charged in GBP via Stripe.

Save 38% vs OEM price

Professionally remanufactured to OEM standards

Ordering a single injector is standard practice.

Need multiple injectors? Simply increase the quantity above.

Every order includes a 12-month workshop warranty, OEM bench-calibration before despatch.

Most 4-cylinder engines use 4 injectors — replace only what your diagnosis confirms.

In stockTested & calibrated12-month warranty

12-Month Warranty

Included on every remanufactured injector. UK-based support if you ever need it.

Tested Before Dispatch

Flow-tested and calibrated on OEM-grade rigs. Test report on file for every unit.

Free UK Delivery

Mainland tracked dispatch. Order before 2pm for same-working-day pick-up.

Trade buyers: VAT receipt included · Account terms on request · Trusted by UK garages & diesel specialists.

1 Compatible Engine Code

3 OE References

1 DENSO Reference

Toyota OEM Replacement

OEM Bench Tested

Why Buy From Us

OEM Bench Tested & Calibrated

12 Month Warranty

Free UK Delivery

UK Diesel Injector Specialists

Technical Support Available

Not sure this is the right injector? Call us on 020 3355 6581

Free UK Delivery Same-Day Dispatch

FREE UK Delivery

International Delivery — flat £50 per order

One injector or multiple injectors

Ships Worldwide

FREE UK Delivery

Flat £50 International Shipping

Royal Mail Tracked
DPD International
Secure Packaging
Tracking Number Included
12 Month Warranty

Need more later? We keep stock available for repeat orders.

Engine Intelligence

Diesel Engine

Common symptoms

Fitment note: Always confirm compatibility using registration lookup or part number before ordering.

Why this injector?

Fits the 1GD-FTV engine code used in the Toyota Hilux (GUN125/GUN126) and related diesel variants.
DENSO diesel injector — flow-tested and calibrated on common-rail equipment before despatch.
Commonly specified when investigating rough idle, injector knock, smoke or poor fuel economy on 1GD-FTV engines.
12-month warranty, free UK delivery and no core exchange required.

Gold VerifiedVerified technical data

Denso 23670-11010 Toyota 1GD-FTV 2.8 D-4D Common Rail Injector

AI Technical Summary

Denso common-rail diesel injector for the Toyota 2.8 D-4D 1GD-FTV engine, Toyota OE 23670-11010 (sibling 23670-30450). Fitted to the current-generation Toyota Hilux (GUN125/126), Fortuner (GUN156), Land Cruiser Prado (GDJ150) and Hiace from 2015 onward. Common failure drivers on these 1GD-FTV injectors are fuel contamination, nozzle coking and internal wear that raises back-leakage until the ECU can no longer compensate. Confirm the stamped OE number 23670-11010 before ordering - the 2.8 1GD-FTV injector is NOT interchangeable with the 2.4 2GD-FTV (23670-0E010 / 23670-0E070) or the older 3.0 1KD-FTV (23670-09350) and 2.5 2KD-FTV (095000-7750) injectors. Key symptoms: Hard starting / extended cranking; Rough idle and vibration; Loss of power / limp mode; Black smoke. Common failure modes: Nozzle coking / poor atomisation; High back-leakage / internal wear; Corrosion from water in fuel.

Common Symptoms

Hard starting / extended crankinghigh

High back-leakage from a worn injector drops cranking rail pressure on the 1GD-FTV, making the engine slow to start, especially when cold.

Rough idle and vibrationhigh

An out-of-balance injector unevenly fuels its cylinder, producing a shaky idle and audible misfire.

Loss of power / limp modehigh

When injector delivery falls outside its correction range the ECU pulls fuel and boost or drops the Hilux/Fortuner into limp mode.

Black smokemedium

Poor atomisation from a worn nozzle over-fuels the cylinder, producing visible black smoke under load.

Diesel knock / rattlemedium

A leaking injector causes a pronounced top-end knock on the 1GD-FTV, often most obvious at idle.

Increased fuel consumptionmedium

Internal leakage and over-fuelling waste fuel and can trigger fuelling-related fault codes.

Workshop & Fitting Notes

codingEach Denso injector carries an individual ID correction code that must be written into the ECU with Techstream after fitting; without coding the 1GD-FTV runs on default trim and may log cylinder-balance faults.
InstallationReplace the fuel filter and check for water/debris before fitting - contaminated fuel is the leading cause of repeat failure on the 1GD-FTV.
InstallationFit a new injector sealing washer and use the correct tightening torque; a reused or crushed washer causes combustion blow-by around the injector bore.
MisdiagnosisRead live injector correction and back-leakage values to find the weak cylinder before removal rather than replacing all four injectors blind.
WarningConfirm the stamped OE number 23670-11010 before ordering - the 2.8 1GD-FTV injector is NOT interchangeable with the 2.4 2GD-FTV (23670-0E010 / 23670-0E070) or the older 1KD-FTV / 2KD-FTV injectors.
TestingBench-test on a Denso-capable common-rail tester (CR318-PRO or equivalent) across delivery and back-leakage points; verify spray pattern and cylinder balance before refitting.

Frequently Asked Questions

What is Denso injector 23670-11010?+

A Denso common-rail diesel injector for the Toyota 2.8 D-4D 1GD-FTV engine. Toyota OE 23670-11010 (sibling 23670-30450).

Which vehicles use 23670-11010?+

Toyota Hilux (GUN125/126), Fortuner (GUN156), Land Cruiser Prado (GDJ150) and Hiace with the 2.8 D-4D 1GD-FTV engine, roughly 2015 onward.

Is it solenoid or piezo?+

It is a Denso solenoid common-rail injector.

What is the Toyota OE number for 23670-11010?+

23670-11010 (with sibling 23670-30450). Always confirm the number stamped on your original injector before ordering.

What are the symptoms of a failing 23670-11010?+

Hard starting, rough idle and vibration, loss of power or limp mode, black smoke, diesel knock and higher fuel consumption.

Why does my Toyota Hilux 2.8 D-4D knock or rattle?+

A leaking injector causes a top-end knock on the 1GD-FTV that is often most obvious at idle. Bench-test to confirm the faulty cylinder before replacing.

What causes these injectors to fail?+

Fuel contamination, water in the fuel, nozzle coking and high-mileage internal wear that raises back-leakage - fix the cause, not just the injector.

Do I need to code the injector to the ECU?+

Yes. Each Denso injector has an individual ID correction code that must be written into the ECU with Techstream after fitting, or the engine runs on default trim and may log cylinder-balance faults.

Is 23670-11010 the same as the 2.4 2GD-FTV injector?+

No. 23670-11010 (OE 23670-11010) is the 2.8 1GD-FTV injector; the 2.4 2GD-FTV uses a different injector (23670-0E010 / 23670-0E070). They are not interchangeable - match the stamped OE number.

Is 23670-11010 the same as the older 1KD-FTV or 2KD-FTV injector?+

No. The 3.0 1KD-FTV (23670-09350) and 2.5 2KD-FTV (095000-7750) use different injectors. The 2.8 1GD-FTV uses 23670-11010 - confirm the stamped OE number.

Should I replace one or all four?+

Diagnose each with live correction and back-leakage values; on high-mileage 1GD-FTV engines failures often cluster, so check all four before deciding.

Does a remanufactured 23670-11010 perform like new?+

A properly remanufactured injector is bench-tested and recalibrated to the Denso plan to meet original delivery and back-leakage specifications.

Related Injectors

23670-09350 23670-0E070

Related Engines

1GD-FTV

Explore this range

You may also need

Compatible alternates from DENSO.

23670-30450

£210 inc. VAT

23670-19015

£210 inc. VAT

DCRI400520

£210 inc. VAT

Remanufacturing Process

Injector fully dismantled

Internal components cleaned and inspected

Worn parts replaced

Reassembled and calibrated

Tested before dispatch

See how our injectors are rebuilt step-by-step in our 3D remanufacturing process video.

Vehicles Compatible With This DENSO Injector

Compatible with Toyota engines including 1GD-FTV.

Make	Model	Engine	Years
Toyota	Hilux (GUN125/GUN126)	2.8 D-4D Common Rail (1GD-FTV)	2015–2024
Toyota	Fortuner (GUN156)	2.8 D-4D Common Rail (1GD-FTV)	2015–2024
Toyota	Land Cruiser Prado (GDJ150)	2.8 D-4D Common Rail (1GD-FTV)	2015–2024
Toyota	Hiace (GDH)	2.8 D-4D Common Rail (1GD-FTV)	2017–2024

Vehicles Using This Injector

Toyota Hilux (GUN125/GUN126) injector Toyota Fortuner (GUN156) injector Toyota Land Cruiser Prado (GDJ150) injector Toyota Hiace (GDH) injector

Compatible Engines

The 2367011010 injector is compatible with the following engines:

1GD-FTV–2.8L D-4D

Also known as

This injector is sold and listed under the references below. Tap any number to copy it — every reference refers to this same product.

All references resolve to this canonical product page. Always confirm exact fitment before ordering.

Compatible Vehicles

This injector fits the following vehicles. Always confirm exact fitment by engine code or registration before ordering.

Toyota Fortuner (GUN156) 2.8 D-4D

Toyota Hiace (GDH) 2.8 D-4D

Toyota Hilux (GUN125/GUN126) 2.8 D-4D

Toyota Land Cruiser Prado (GDJ150) 2.8 D-4D

Product Description

The DENSO 23670-11010 diesel injector is a remanufactured common-rail injector for 2.8L D-4D engines.

DENSO 23670-11010 remanufactured common-rail diesel injector for Toyota 2.8 D-4D (1GD-FTV) engines — Hilux (GUN125/126), Fortuner (GUN156), Land Cruiser Prado (GDJ150), Hiace.

Professionally tested and calibrated to OEM specification.

Includes: OEM Tested, 12 Month Warranty, Free UK Delivery..

Common engine code: 1GD-FTV.

Commonly replaced when investigating rough idle, injector knock, excess smoke or poor fuel economy.

Each injector is tested to OEM standards with a 12-month warranty and free UK delivery.

Workshop Information

Installation Notes

Check injection values after installation
Ensure system cleanliness before fitting
Use calibrated test equipment for verification
Check engine-specific torque values before installation

Recommended Injector Coding

No injector coding is required for the DENSO unit on most applications — follow the manufacturer fitting procedure.

Replacement Advice

Always renew the copper washers / seals and bleed the fuel system before first start. Replace only the injectors your diagnosis confirms and torque fasteners to the manufacturer's published values.

Professional Installation

We recommend installation by a suitably equipped diesel specialist using calibrated test equipment to verify the fuel system after fitting.

Common Engines Using This Injector

1GD-FTV

Common Symptoms of a Failed 2367011010 Injector

Hard starting Rough idle Excessive smoke Poor fuel economy Engine misfires Loss of power under load

If your vehicle shows these symptoms, replacing the diesel injector may restore engine performance. A leak-off test can confirm the diagnosis.

Testing & Warranty

All remanufactured injectors are tested using OEM-grade diagnostic equipment to ensure fuel pressure and spray pattern meet manufacturer specifications.

OEM Test Bench Calibration

Flow-tested on Bosch EPS 200 series bench to verify fuel delivery rates at all operating pressures.

Leak-Off Testing

Each injector is tested for return flow to ensure no excess fuel is wasted back to the tank.

Solenoid Calibration

Electrical response time verified to ensure precise injection timing and quantity.

12-Month Warranty

Full replacement or refund covering manufacturing defects under normal use. No quibble.

IMA code includedProfessional injector coding may be required after installationUK-based support teamNo core exchange required

2367011010 Price Statistics

Average Price

£210.00

inc. VAT

Price Range

£210–£210

inc. VAT

Stock

0/0

In Stock

Prices based on 0 listing for the 2367011010 injector. All prices include VAT.

Compatible Vehicles for 2367011010

2367011010 is OE-fit on the vehicles below. Always confirm the engine code on your V5C and the OE marking on the failed unit before ordering — sister part numbers in this family can look identical but carry a different calibration map.