Is the Denso 095000-6980 compatible with the Isuzu D-Max (RT)?

Yes. The Denso 095000-6980 is a direct replacement diesel injector for the Isuzu D-Max (RT) 3.0 and the other listed applications. Always confirm fitment by engine code or vehicle registration before ordering.

Does the Denso 095000-6980 require injector coding?

No injector coding is required for the Denso 095000-6980 on most applications. Always follow the manufacturer's fitting procedure.

Is the 095000-6980 supplied tested?

Yes. Every Denso 095000-6980 is OEM bench-tested and calibrated to manufacturer tolerances before dispatch.

Is a warranty included with the 095000-6980?

Yes. The Denso 095000-6980 includes a 12 months warranty as standard, with free UK delivery.

Is an exchange or core return required?

Yes. A £20 refundable core deposit per injector is charged separately at checkout and refunded when your old unit is returned within 30 days, in accordance with our Exchange Policy.

What vehicles use the 0950006980 injector?

The 0950006980 injector is compatible with Isuzu D-MAX (RT), Holden RODEO RA, Holden COLORADO RC, Chevrolet COLORADO and other diesel vehicles. Check the compatible vehicles section above for the full list.

What engines use the 0950006980 injector?

The 0950006980 injector is used in 4JJ1-TC, 4JJ1-TCX engine codes.

What are symptoms of a failing 0950006980 injector?

Common symptoms of a failing 0950006980 injector include hard starting, rough idle, excessive black or white smoke, engine misfires, poor fuel economy, and loss of power under load. A professional leak-off test can confirm whether the injector needs replacing.

How much does it cost to replace the 0950006980 injector?

A remanufactured Denso 0950006980 injector typically costs between £190 and £190. Labour costs vary by vehicle but usually add £100–£250 per injector. All our remanufactured injectors come with a 12-month warranty.

Zoom1 / 4In Stock

Need Help Confirming Fitment?

Not sure this injector fits your vehicle? Check using your registration number before ordering.

Engine Code or Cross Reference

Denso 095000-6980 Diesel Injector

Name: Remanufactured Denso Diesel Injector 0950006980
Brand: Denso
SKU: 0950006980
Price: 190.00 GBP
Availability: InStock

DENSO

Part No: 095000-6980

·Trade & Garage Friendly

Not 100% sure? or call us.

In Stock — Ships within 24 hours

The Denso 095000-6980 diesel injector is a remanufactured common-rail injector for 3.0L 4JJ1-TC engines. Isuzu 4JJ1-TC 3.0 Remanufactured Common Rail Diesel Injector.

£190inc. VAT

(per injector)

+ £20 refundable core deposit per injector — refunded when your old unit is returned within 30 days

All prices are shown in GBP (£). International customers are securely charged in GBP via Stripe.

Save 38% vs OEM price

Professionally remanufactured to OEM standards

Ordering a single injector is standard practice.

Need multiple injectors? Simply increase the quantity above.

Every order includes a 12-month workshop warranty, OEM bench-calibration before despatch.

Most 4-cylinder engines use 4 injectors — replace only what your diagnosis confirms.

In stockTested & calibrated12-month warranty

12-Month Warranty

Included on every remanufactured injector. UK-based support if you ever need it.

Tested Before Dispatch

Flow-tested and calibrated on OEM-grade rigs. Test report on file for every unit.

Free UK Delivery

Mainland tracked dispatch. Order before 2pm for same-working-day pick-up.

Trade buyers: VAT receipt included · Account terms on request · Trusted by UK garages & diesel specialists.

2 Compatible Engine Codes

4 OE References

2 Denso References

Isuzu OEM Replacement

OEM Bench Tested

Why Buy From Us

OEM Bench Tested & Calibrated

12 Month Warranty

Free UK Delivery

UK Diesel Injector Specialists

Technical Support Available

Not sure this is the right injector? Call us on 020 3355 6581

Free UK Delivery Same-Day Dispatch

FREE UK Delivery

International Delivery — flat £50 per order

One injector or multiple injectors

Ships Worldwide

FREE UK Delivery

Flat £50 International Shipping

Royal Mail Tracked
DPD International
Secure Packaging
Tracking Number Included
12 Month Warranty

Need more later? We keep stock available for repeat orders.

Engine Intelligence

Isuzu 3.0 DI-D (4JJ1-TC/TCX — D-Max, Rodeo, Colorado, NPR) 4JJ1-TC

Common symptoms

Hard or extended cranking
Rough or lumpy idle
White, blue or black smoke
Hesitation under load, poor fuel economy, diesel knock or rattle
Occasional stalling or limp mode

Documented failure modes

Injector wear or internal leakage — balance/compensation values drift out of specification before major drivability symptoms appear
Leaking injector diluting the engine oil (rising level, diesel smell in the sump)
Injector back-leak dragging rail pressure down on high-mileage engines

Diagnostic guidance

Read injector balance / compensation values — one cylinder far from the others identifies the failing unit early
Check the engine oil for diesel dilution; a rising level points to a leaking injector on this engine
Run an injector leak-back test on hard-start or P0087 complaints
Denso injectors carry an ID code — register the new code after fitting

Fault codes linked to this engine's injectors

P0087 P0201 P0202 P0203 P0204 P0263 P0266 P0269

Fitment note: 4JJ1 variants (TC/TCX, DPF and non-DPF, by model year) use different Denso references — always match the reference etched on the injector body.

Browse every diesel engine we cover →

Why this injector?

Fits the 4JJ1-TC engine code used in the Isuzu D-Max (RT) and related diesel variants.
Denso diesel injector — flow-tested and calibrated on common-rail equipment before despatch.
Commonly specified when investigating rough idle, injector knock, smoke or poor fuel economy on 4JJ1-TC engines.
12-month warranty, free UK delivery and a £20 refundable core deposit per injector (refunded when your old unit is returned).

Gold VerifiedVerified technical data

Denso 095000-6980 Isuzu 4JJ1-TC 3.0 Common Rail Injector

AI Technical Summary

Denso common-rail diesel injector for the Isuzu 4JJ1-TC / 4JJ1-TCX 3.0-litre engine, cross-referenced to Isuzu OE family 8-98011604. Fitted to the Isuzu D-Max (3.0), Holden Rodeo RA and Colorado RC, and Chevrolet Colorado (2007-2012). Common failure drivers on these 4JJ1 injectors are fuel contamination, nozzle coking and internal wear that raises back-leakage until the ECU can no longer compensate. Key symptoms: Hard starting / extended cranking; Rough idle and vibration; Loss of power / limp mode; Black smoke. Common failure modes: Nozzle coking / poor atomisation; High back-leakage / internal wear; Corrosion from water in fuel.

Common Symptoms

Hard starting / extended crankinghigh

High back-leakage from a worn injector drops cranking rail pressure on the 4JJ1, making the engine slow to start, especially when cold.

Rough idle and vibrationhigh

An out-of-balance injector unevenly fuels its cylinder, producing a shaky idle and audible misfire.

Loss of power / limp modehigh

When injector delivery falls outside its correction range the ECU pulls fuel and boost or drops the D-Max into limp mode.

Black smokemedium

Poor atomisation from a worn nozzle over-fuels the cylinder, producing visible black smoke under load.

Diesel knock / rattlemedium

A leaking injector causes a pronounced top-end knock on the 4JJ1, often most obvious at idle.

Increased fuel consumptionmedium

Internal leakage and over-fuelling waste fuel and can trigger fuelling-related fault codes.

Workshop & Fitting Notes

codingEach Denso injector carries an individual ID/QR correction code that must be written into the ECU after fitting; without coding the 4JJ1 runs on default trim and may log cylinder-balance faults.
InstallationReplace the fuel filter and check for water/debris before fitting - contaminated fuel is the leading cause of repeat failure on the 4JJ1.
InstallationFit a new injector sealing washer and use the correct tightening torque; a reused or crushed washer causes combustion blow-by around the injector bore.
MisdiagnosisRead live injector correction and back-leakage values to find the weak cylinder before removal rather than replacing all four injectors blind.
WarningConfirm the stamped Denso number (095000-6980) and Isuzu OE (8-98011604) before ordering - the 4JJ1 ran several injector revisions and the 2.5 4JK1 (095000-6992 / 8-98011605) is NOT interchangeable.
TestingBench-test on a Denso-capable common-rail tester across delivery and back-leakage points; verify spray pattern and cylinder balance before refitting.

Frequently Asked Questions

What is Denso injector 095000-6980?+

A Denso common-rail diesel injector for the Isuzu 4JJ1-TC / 4JJ1-TCX 3.0 engine, cross-referenced to Isuzu OE family 8-98011604.

Which vehicles use 095000-6980?+

Isuzu D-Max 3.0, Holden Rodeo RA and Colorado RC, and Chevrolet Colorado with the 3.0 4JJ1-TC engine (2007-2012).

Is it solenoid or piezo?+

It is a Denso solenoid common-rail injector.

What is the Isuzu OE number for 095000-6980?+

The Isuzu OE family is 8-98011604 (e.g. 8-98011604-1 / 8-98011604-5). Always confirm the number stamped on your original injector before ordering.

What are the symptoms of a failing 095000-6980?+

Hard starting, rough idle and vibration, loss of power or limp mode, black smoke, diesel knock and higher fuel consumption.

Why does my Isuzu D-Max knock or rattle?+

A leaking injector causes a top-end knock on the 4JJ1 that is often most obvious at idle. Bench-test to confirm the faulty cylinder before replacing.

What causes these injectors to fail?+

Fuel contamination, water in the fuel, nozzle coking and high-mileage internal wear that raises back-leakage - fix the cause, not just the injector.

Do I need to code the injector to the ECU?+

Yes. Each Denso injector has an individual ID correction code that must be written into the ECU after fitting, or the engine runs on default trim and may log cylinder-balance faults.

Is 095000-6980 the same as the 2.5 4JK1 injector?+

No. 095000-6980 (8-98011604) is the 3.0 4JJ1-TC injector; the 2.5 4JK1-TC uses a different injector (095000-6992 / 8-98011605). They are not interchangeable - match the stamped number.

Should I replace one or all four?+

Diagnose each with live correction and back-leakage values; on high-mileage 4JJ1 engines failures often cluster, so check all four before deciding.

Does a remanufactured 095000-6980 perform like new?+

A properly remanufactured injector is bench-tested and recalibrated to the Denso plan to meet original delivery and back-leakage specifications.

Related Injectors

095000-6983 DCRI107800

Related Engines

4JJ1-TC4JJ1-TCX

Explore this range

You may also need

Compatible alternates from Denso.

£190 inc. VAT

£190 inc. VAT

£190 inc. VAT

£190 inc. VAT

Remanufacturing Process

Injector fully dismantled

Internal components cleaned and inspected

Worn parts replaced

Reassembled and calibrated

Tested before dispatch

See how our injectors are rebuilt step-by-step in our 3D remanufacturing process video.

Vehicles Compatible With This Denso Injector

Compatible with Isuzu, Holden, Chevrolet engines including 4JJ1-TC, 4JJ1-TCX.

Make	Model	Engine	Years
Isuzu	D-Max (RT)	3.0 4JJ1-TC	2007-2012
Holden	Rodeo RA	3.0 4JJ1-TC	2007-2008
Holden	Colorado RC	3.0 4JJ1-TC	2008-2012
Chevrolet	Colorado	3.0 4JJ1-TC	2007-2012

Vehicles Using This Injector

Isuzu D-Max (RT) injector Holden Rodeo RA injector Holden Colorado RC injector Chevrolet Colorado injector

Compatible Engines

The 0950006980 injector is compatible with the following engines:

4JJ1-TC–3.0L 4JJ1-TC 4JJ1-TCX–3.0L 4JJ1-TC

Also known as

This injector is sold and listed under the references below. Tap any number to copy it — every reference refers to this same product.

All references resolve to this canonical product page. Always confirm exact fitment before ordering.

Compatible Vehicles

This injector fits the following vehicles. Always confirm exact fitment by engine code or registration before ordering.

Chevrolet Colorado 3.0

Holden Colorado RC 3.0

Holden Rodeo RA 3.0

Isuzu D-Max (RT) 3.0

Product Description

The Denso 095000-6980 diesel injector is a remanufactured common-rail injector for 3.0L 4JJ1-TC engines.

Isuzu 4JJ1-TC 3.0 Remanufactured Common Rail Diesel Injector.

Common engine code: 4JJ1-TC.

Commonly replaced when investigating rough idle, injector knock, excess smoke or poor fuel economy.

Each injector is tested to OEM standards with a 12-month warranty and free UK delivery.

Workshop Information

Installation Notes

Check injection values after installation
Ensure system cleanliness before fitting
Use calibrated test equipment for verification
Check engine-specific torque values before installation

Recommended Injector Coding

No injector coding is required for the Denso unit on most applications — follow the manufacturer fitting procedure.

Replacement Advice

Always renew the copper washers / seals and bleed the fuel system before first start. Replace only the injectors your diagnosis confirms and torque fasteners to the manufacturer's published values.

Professional Installation

We recommend installation by a suitably equipped diesel specialist using calibrated test equipment to verify the fuel system after fitting.

Common Engines Using This Injector

4JJ1-TC 4JJ1-TCX

Common Symptoms of a Failed 0950006980 Injector

Hard starting Rough idle Excessive smoke Poor fuel economy Engine misfires Loss of power under load

If your vehicle shows these symptoms, replacing the diesel injector may restore engine performance. A leak-off test can confirm the diagnosis.

Testing & Warranty

All remanufactured injectors are tested using OEM-grade diagnostic equipment to ensure fuel pressure and spray pattern meet manufacturer specifications.

OEM Test Bench Calibration

Flow-tested on Bosch EPS 200 series bench to verify fuel delivery rates at all operating pressures.

Leak-Off Testing

Each injector is tested for return flow to ensure no excess fuel is wasted back to the tank.

Solenoid Calibration

Electrical response time verified to ensure precise injection timing and quantity.

12-Month Warranty

Full replacement or refund covering manufacturing defects under normal use. No quibble.

IMA code includedProfessional injector coding may be required after installationUK-based support team£20 refundable core deposit per injector

0950006980 Price Statistics

Average Price

£190.00

inc. VAT

Price Range

£190–£190

inc. VAT

Stock

0/0

In Stock

Prices based on 0 listing for the 0950006980 injector. All prices include VAT.

Compatible Vehicles for 0950006980

0950006980 is OE-fit on the vehicles below. Always confirm the engine code on your V5C and the OE marking on the failed unit before ordering — sister part numbers in this family can look identical but carry a different calibration map.