Denso DCRI100360 Diesel Injector
3.0L · DCRI100360
Remanufactured DENSO DCRI100360 (095000-0366) common-rail diesel injector for the Isuzu 6DE1 3.0 V6 engine (OE 8-97239161-0 to -9 / 97239161, GM 5821085, Renault 7701477687). Fits Renault Vel Satis and Espace IV 3.0 dCi (P9X701) 2002–2008, Opel/Vauxhall Vectra C and Signum 3.0 V6 CDTI (Y30DT) 2003–2005 and Saab 9-5 3.0 TiD (D308L) 2001–2006. Note: the later Z30DT 3.0 CDTI (2005-on Vectra/Signum) is a different generation and uses a different injector. Fully tested and calibrated to OEM specification with 12 months warranty.
3
Engine codes
16
OE / cross-refs
3
Vehicle fitments
12mo
Warranty
Common failure symptoms
On the 3.0L platform, a failing DENSO DCRI100360 injector typically presents as: hard starting; uneven idle; power loss / limp mode; excess smoke under load; diesel knock from one bank.
When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.
When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.
What Causes These Injectors To Fail
The documented failure modes on this platform are: injector leak-back rising with wear; nozzle coking on egr-heavy duty cycles; seat washer combustion leaks.
Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.
How Workshops Diagnose DCRI100360 Faults
Access differs sharply by bank on this transverse V6 — compare leak-off across both banks before stripping. Clean seats and fit new washers on every injector removed. Denso injectors carry compensation data — follow the manufacturer registration procedure.
Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.
How Every Unit Is Tested Before Despatch
Each remanufactured DCRI100360 is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.
Every unit carries a 12-month parts warranty and free UK delivery.
Vehicle Coverage At A Glance
The DCRI100360 trusted family covers 3 verified vehicle fitments across 3 makes: Renault, Opel / Vauxhall and Saab. Every fitment listed on this page is registry-verified — no scraped or assumed applications.
OE & Cross-References
DCRI100360 supersedes or cross-references 15 further OE numbers, including 095000-0366, 0950000366, 5821085, 97239161, 7701477687, 8-97239161-0, 8-97239161-1 and 8-97239161-2. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.
Related fault codes & engine guides
Trusted compatibility
Vehicle fitments
| Make | Model | Engine | Years |
|---|---|---|---|
| Opel / Vauxhall | Vectra C / Signum | Y30DT 3.0 V6 CDTI (177 hp) | 2003–2005 |
| Renault | Vel Satis / Espace IV | P9X701 3.0 dCi V6 (177 hp) | 2002–2008 |
| Saab | 9-5 | D308L 3.0 TiD V6 (177 hp) | 2001–2006 |
Confirm fitment by registration
Enter your UK registration to verify your vehicle is in this trusted family. We'll cross-check the engine code against P9X701 / D308L / Y30DT.
Confirm fitment for your vehicle
Frequently asked
Related engine guides
Other Denso and same-platform injector families worth checking.
All cross-references in this family
Every reference below resolves to a PDP linked to this trusted family. DCRI100360, 095000-0366, 0950000366, 5821085, 97239161, 7701477687, 8-97239161-0, 8-97239161-1, 8-97239161-2, 8-97239161-3, 8-97239161-4, 8-97239161-5, 8-97239161-6, 8-97239161-7, 8-97239161-8, 8-97239161-9.
Denso know-how from the Knowledge Centre
Identification, coding, fitting and the mistakes that cause comebacks.