Denso 23670-26011 Diesel Injector
2.2L D-4D · 23670-26011
Toyota / Lexus 2AD-FTV 2.2 D-4D Denso common-rail injector
3
Engine codes
6
OE / cross-refs
6
Vehicle fitments
12mo
Warranty
Common failure symptoms
On the 2.2L D-4D platform, a failing Denso 23670-26011 injector typically presents as: hard starting or extended cranking; rough or uneven idle; loss of power under load; excess smoke from the exhaust; cylinder misfire or contribution fault codes.
When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.
When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.
What Causes These Injectors To Fail
The documented failure modes on this platform are: injector back-leak beyond specification; nozzle wear degrading the spray pattern; combustion gas leaks past the injector seat washer.
Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.
How Workshops Diagnose 23670-26011 Faults
Run a comparative leak-off (back-leak) test across all injectors before condemning a single unit. Compare requested vs actual rail pressure in live data at idle and under load. Inspect injector connectors and wiring before replacing hardware.
Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.
How Every Unit Is Tested Before Despatch
Each remanufactured 23670-26011 is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.
Every unit carries a 12-month parts warranty and free UK delivery.
Vehicle Coverage At A Glance
The 23670-26011 trusted family covers 6 verified vehicle fitments across 2 makes: Toyota and Lexus. Every fitment listed on this page is registry-verified — no scraped or assumed applications.
OE & Cross-References
23670-26011 supersedes or cross-references 5 further OE numbers, including 23670-26020, 23670-26012, 23670-26050, 23670-29135 and 23670-39255. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.
Related fault codes & engine guides
Trusted compatibility
OE / cross-references (5)
Vehicle fitments
| Make | Model | Engine | Years |
|---|---|---|---|
| Lexus | IS 220d/200d | 2.2 D-4D (2AD-FHV) | 2005–2013 |
| Toyota | Avensis (T25/T27) | 2.2 D-4D (2AD-FTV/FHV) | 2005–2018 |
| Toyota | Auris (E150) | 2.2 D-4D (2AD-FTV) | 2007–2012 |
| Toyota | Corolla Verso (R10) | 2.2 D-4D (2AD-FTV) | 2005–2009 |
| Toyota | Verso (R20) | 2.2 D-4D (2AD-FTV) | 2009–2015 |
| Toyota | RAV4 (XA30) | 2.2 D-4D (2AD-FTV/FHV) | 2006–2013 |
Confirm fitment by registration
Enter your UK registration to verify your vehicle is in this trusted family. We'll cross-check the engine code against 2AD-FTV / 2ADFTV / 2AD-FHV.
Confirm fitment for your vehicle
Frequently asked
Related engine guides
Other Denso and same-platform injector families worth checking.
All cross-references in this family
Every reference below resolves to a PDP linked to this trusted family. 23670-26011, 23670-26020, 23670-26012, 23670-26050, 23670-29135, 23670-39255.
Denso know-how from the Knowledge Centre
Identification, coding, fitting and the mistakes that cause comebacks.