Skip to main content

Ships Worldwide•FREE UK•£50 International

Trade customer? Get Trade Pricing
OEM Tested
12-Month Warranty
Free UK Delivery
Same-Day Dispatch

Y30DT Diesel Injectors

Compatible with Opel / Vauxhall Vectra C / Signum

  • OEM Tested & Calibrated
  • 12-Month Warranty
  • Free UK Delivery

Select the correct injector for your Y30DT engine below

Fits Opel / Vauxhall Vectra C / Signum and more

Compatible Injectors for Y30DT

  • OEM Tested
  • 12-Month Warranty
  • Free UK Delivery
Check CompatibilityCall 020 3355 6581
Order by 2pm — tracked UK courier

Common problems solved by these injectors

About the Y30DT engine

The Y30DT is a 3.0l common rail diesel engine. This engine uses DENSO diesel injectors.

How Diesel Injectors Are Remanufactured

Watch our 3D walkthrough of the diesel injector remanufacturing process and see how injectors are professionally restored for reliable service.

Vehicles Using Y30DT Engine

VehicleEngineYears
Opel / Vauxhall Vectra C / Signum injector 3.0L2003–2005

Common Y30DT Injector Problems

1

Rough idle and engine vibration

Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.

2

Excessive exhaust smoke

Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.

3

Poor fuel economy

A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.

4

Engine misfire under load

Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.

5

Difficult cold starting

Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

6

Loss of power

Gradual power loss across the rev range, particularly above 2500 RPM, can indicate injector flow rate degradation.

7

Increased diesel knock

Louder than normal combustion noise, especially at idle, can indicate incorrect injection timing due to worn injector internals.

Y30DT Technical Specifications

Displacement

—

Power

—

Torque

—

Fuel System

Common Rail Direct Injection

The Y30DT is a 3.0l common rail diesel engine. This engine uses DENSO diesel injectors.

Engine Intelligence

Isuzu 6DE1 3.0 V6 (Renault / Vauxhall / Saab — P9X701, Y30DT, D308L — Denso)

Documented failure modes

  • Injector leak-back rising with wear
  • Nozzle coking on EGR-heavy duty cycles
  • Seat washer combustion leaks

Diagnostic guidance

  • Access differs sharply by bank on this transverse V6 — compare leak-off across both banks before stripping
  • Clean seats and fit new washers on every injector removed
  • Denso injectors carry compensation data — follow the manufacturer registration procedure

Fault codes linked to this engine's injectors

Fitment note: The same Isuzu 6DE1 V6 appears as Renault P9X701, Vauxhall/Opel Y30DT and Saab D308L — one injector platform, three badges. Order by the DCRI / 095000 reference etched on the injector.

Browse every diesel engine we cover →

Related Y30DT Engine Guides

Related Pages

DENSO 3.0L — browse compatible engines, vehicles, and injectors

More resources for Y30DT owners