Which engines use the Denso 095000-7750 injector?

095000-7750 is verified for the 2.5L 2KD-FTV platform, covering engine code 2KD-FTV. Confirm the engine code on your V5C before ordering.

Which vehicles does 095000-7750 fit?

This family has 3 verified fitments across Toyota — the full registry-verified list is on this page.

My injector is etched with a different number — is it the same part?

095000-7750 cross-references 095000-7751, 095000-7760, 095000-7761, 23670-30300, 2367030300 and 23670-39276 among others. If your etched number appears in this family's reference list it is a verified equivalent; if not, send us a photo of the etching and we will confirm before you order.

Do I need to code the replacement injector to the ECU?

Yes on common-rail diesels. Every injector ships with an individual calibration code that must be written to the ECU after fitting, following the manufacturer procedure — without it the engine runs on default trims and can log cylinder-balance faults.

How is each injector tested before despatch?

Every unit is bench-calibrated against the manufacturer specification — delivery, back-leak and response verified — and despatched with a 12-month parts warranty and its calibration data retained on file.

Trusted FamilyDensoRemanufactured

Denso 095000-7750 Diesel Injector

Name: Denso 095000-7750 Remanufactured Diesel Injector
Brand: Denso
SKU: 095000-7750
Price: 190.00 GBP
Availability: InStock

2.5L 2KD-FTV · 095000-7750

Toyota 2KD-FTV 2.5 D-4D Remanufactured Common Rail Diesel Injector

Engine codes

OE / cross-refs

Vehicle fitments

12mo

Warranty

Common failure symptoms

On the 2.5L 2KD-FTV platform, a failing Denso 095000-7750 injector typically presents as: diesel knock / injector rattle at idle; rough running when cold; black smoke under load; misfire on individual cylinders; loss of power.

When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.

When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.

What Causes These Injectors To Fail

The documented failure modes on this platform are: injector leak-back rising with wear (documented kd-series trait); nozzle wear causing over-fuelling and combustion damage risk on neglected engines; injector seal leaks allowing combustion blow-by.

Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.

How Workshops Diagnose 095000-7750 Faults

Do not ignore injector rattle on KD engines — prolonged over-fuelling from worn injectors is documented to cause combustion damage. Compare leak-off across all injectors before ordering replacements. Denso compensation codes must be registered using the manufacturer diagnostic procedure after fitting.

Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.

How Every Unit Is Tested Before Despatch

Each remanufactured 095000-7750 is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.

Every unit carries a 12-month parts warranty and free UK delivery.

Vehicle Coverage At A Glance

The 095000-7750 trusted family covers 3 verified vehicle fitments across 1 make: Toyota. Every fitment listed on this page is registry-verified — no scraped or assumed applications.

OE & Cross-References

095000-7750 supersedes or cross-references 7 further OE numbers, including 095000-7751, 095000-7760, 095000-7761, 23670-30300, 2367030300, 23670-39276 and 23670-39215. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.