Denso 23670-0E070 Diesel Injector
2.5 · 23670-0E070
Remanufactured Denso 23670-0E070 common rail diesel injector for Toyota Hilux, Hiace, Fortuner, and Innova. Compatible with Toyota 2KD-FTV (2.5 D-4D) and 2GD (2.4 D-4D) engines. OEM-tested on CR318-PRO test bench. 12-month warranty. Free UK delivery.
1
Engine codes
6
OE / cross-refs
4
Vehicle fitments
12mo
Warranty
Common failure symptoms
On the 2.5 platform, a failing Denso 23670-0E070 injector typically presents as: hard starting or extended cranking; rough or uneven idle; loss of power under load; excess smoke from the exhaust; cylinder misfire or contribution fault codes.
When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.
When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.
What Causes These Injectors To Fail
The documented failure modes on this platform are: injector back-leak beyond specification; nozzle wear degrading the spray pattern; combustion gas leaks past the injector seat washer.
Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.
How Workshops Diagnose 23670-0E070 Faults
Run a comparative leak-off (back-leak) test across all injectors before condemning a single unit. Compare requested vs actual rail pressure in live data at idle and under load. Inspect injector connectors and wiring before replacing hardware.
Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.
How Every Unit Is Tested Before Despatch
Each remanufactured 23670-0E070 is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.
Every unit carries a 12-month parts warranty and free UK delivery.
Vehicle Coverage At A Glance
The 23670-0E070 trusted family covers 4 verified vehicle fitments across 1 make: Toyota. Every fitment listed on this page is registry-verified — no scraped or assumed applications.
OE & Cross-References
23670-0E070 supersedes or cross-references 4 further OE numbers, including 23670-08040, 2367008040, 295700-1110 and 2957001110. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.
Related fault codes & engine guides
Engine guides
Trusted compatibility
Engine codes
OE / cross-references (4)
Confirm fitment by registration
Enter your UK registration to verify your vehicle is in this trusted family. We'll cross-check the engine code against 2GD.
Confirm fitment for your vehicle
Frequently asked
Related engine guides
Other Denso and same-platform injector families worth checking.
All cross-references in this family
Every reference below resolves to a PDP linked to this trusted family. 23670-0E070, 23670-08040, 2367008040, 295700-1110, 2957001110.
Denso know-how from the Knowledge Centre
Identification, coding, fitting and the mistakes that cause comebacks.