Engine injector problems

This section of the Remanufactured Injector website loads its pages in the browser.

Skip to main content

Ships Worldwide•FREE UK•£50 International

REMANUFACTURED INJECTORDiesel Injectors & Fuel Pumps

YMF6 Injector Problems – Symptoms, Causes & Fixes

Engine: YMF6 1 compatible injectors From £80

Common Injector Failures on the YMF6

The YMF6 engine uses high-pressure common rail diesel injection. Over time, injector nozzles wear, seals degrade, and internal components lose calibration. This leads to a range of drivability symptoms that worsen if left unaddressed. We stock 1 tested replacement injectors for this engine from Siemens VDO / Continental.

Vehicles fitted with the YMF6 include models from Ford. If you are experiencing any of the symptoms below, your injectors may need testing or replacement.

Symptoms of Injector Failure

Black Smoke
White Smoke
Rough Idle
Hard Starting
Engine Knock

Related Fault Codes

P0201P0202P0203P0204P0263P0266P0269P0087P0089P0300

How to Test YMF6 Injectors

Leak-off test: Connect clear hoses to the injector return lines and compare fuel volumes at idle. The injector returning the most fuel is likely worn.

Correction values: Use a scan tool to read injector correction (IMA) values. Readings beyond ±3 mg/stroke indicate wear.

Resistance check: Measure resistance across the injector connector pins with a multimeter. Compare to manufacturer specs.

Complete Testing Guide Leak-Off Test Guide

YMF6 Injector Replacement Cost

Parts (per injector)

£80–£80

Labour

£150–£400

Total (per injector)

£230–£480

Full replacement cost guide

Compatible Injectors for the YMF61 found

A2C9303500080
A2C9303500080Siemens VDO / Continental
£80.00

Related Cross Reference Numbers for YMF6

2802002051380562000410AAA9858060010

Related Engine Codes

ADBC ADBD YLF6 YMFA YMFB YMFS

Frequently Asked Questions

What are common injector problems on the YMF6 engine?
The YMF6 engine commonly suffers from injector seal failure, nozzle wear causing poor spray patterns, and back-leak issues. Symptoms include rough idle, black or white exhaust smoke, hard starting, and increased fuel consumption. These issues typically appear after 100,000–150,000 miles.
How much does it cost to replace injectors on a YMF6 engine?
A remanufactured injector for the YMF6 engine typically costs £80–£80 per injector. Labour adds £150–£400 depending on accessibility. We found 1 compatible injectors for this engine.
Which vehicles use the YMF6 engine?
The YMF6 engine is found in vehicles from Ford. Common models include Ford Ranger, Ford Tourneo Custom, Ford Transit, Ford Transit Custom.
How do I test the injectors on a YMF6 engine?
Perform a leak-off test by connecting clear hoses to each injector return line and comparing fuel volumes at idle. You can also check injector correction values with a diagnostic scan tool or measure electrical resistance with a multimeter.

Injector Compatibility Checker

Explore Related Content

Diagnostic Guides

Need a Replacement YMF6 Injector?

We stock 1 tested replacement injectors for the YMF6 engine. All remanufactured, bench-tested, and supplied with a 12-month warranty.

View All InjectorsReplacement Cost Guide Call 020 3355 6581