Delphi 28337917 Diesel Injector
2.4L · 28337917
Remanufactured Delphi 28337917 common-rail diesel injector for Doosan D18 (1.8L) and D24 (2.4L) Tier 4 engines (OE 400903-00074C/D, Bobcat 7030364 / 7275454 / 7334032). Fits Bobcat S450–S550 skid-steer loaders and T450–T650 compact track loaders plus Doosan-powered plant. Fully tested and calibrated to OEM specification with 12 months warranty.
2
Engine codes
7
OE / cross-refs
3
Vehicle fitments
12mo
Warranty
Common failure symptoms
On the 2.4L platform, a failing Delphi 28337917 injector typically presents as: hard starting or extended cranking; rough or uneven idle; loss of power under load; excess smoke from the exhaust; cylinder misfire or contribution fault codes.
When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.
When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.
What Causes These Injectors To Fail
The documented failure modes on this platform are: injector back-leak beyond specification; nozzle wear degrading the spray pattern; combustion gas leaks past the injector seat washer.
Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.
How Workshops Diagnose 28337917 Faults
Run a comparative leak-off (back-leak) test across all injectors before condemning a single unit. Compare requested vs actual rail pressure in live data at idle and under load. Inspect injector connectors and wiring before replacing hardware.
Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.
How Every Unit Is Tested Before Despatch
Each remanufactured 28337917 is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.
Every unit carries a 12-month parts warranty and free UK delivery.
Vehicle Coverage At A Glance
The 28337917 trusted family covers 3 verified vehicle fitments across 2 makes: Bobcat and Doosan. Every fitment listed on this page is registry-verified — no scraped or assumed applications.
OE & Cross-References
28337917 supersedes or cross-references 6 further OE numbers, including 400903-00074C, 400903-00074D, 7030364, 7275454, 7334032 and EX631088. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.
Related fault codes & engine guides
Trusted compatibility
OE / cross-references (6)
Vehicle fitments
| Make | Model | Engine | Years |
|---|---|---|---|
| Bobcat | S450 / S510 / S530 / S550 skid-steer loaders | Doosan D18/D24 Tier 4 | 2013–2020 |
| Bobcat | T450 / T550 / T590 / T595 / T630 / T650 compact track loaders | Doosan D18/D24 Tier 4 | 2013–2020 |
| Doosan | D18 / D24 industrial & plant applications | D18 (1.8L) / D24 (2.4L) Tier 4 | 2013–2020 |
Confirm fitment by registration
Enter your UK registration to verify your vehicle is in this trusted family. We'll cross-check the engine code against D24 / D18.
Confirm fitment for your vehicle
Frequently asked
Related engine guides
Other Delphi and same-platform injector families worth checking.
All cross-references in this family
Every reference below resolves to a PDP linked to this trusted family. 28337917, 400903-00074C, 400903-00074D, 7030364, 7275454, 7334032, EX631088.
Delphi know-how from the Knowledge Centre
Identification, coding, fitting and the mistakes that cause comebacks.