Is P0257 always a pump fault?

No. Excessive injector back-leak is one of the most common causes of rail-pressure faults on high-mileage diesels — always run a leak-off comparison before replacing the pump.

Why does the fault appear mainly when hot?

Diesel thins as it warms, so marginal internal leaks in injectors and regulators flow more when hot. A warm-engine test catches faults a cold test misses.

Can a blocked filter trigger this code?

Yes. A starved low-pressure side stops the high-pressure pump building demand pressure. Check the filter and supply before high-cost parts.

P0257 Injection Pump Metering Control B Low — Causes & Fix

What Does P0257 Mean?

P0257 indicates the metering control on the injection pump is operating outside its control window. The ECU cannot hold commanded delivery, causing power loss, smoke or non-starts. Metering valve response, wiring and injector back-leak are tested before condemning the pump.

P0257 at a Glance

What it means: The injection pump's fuel metering control is outside its expected range.
Most common cause: Injection pump fuel metering valve fault
Severity: Moderate to serious — rail-pressure faults cause power loss and non-starts.
Can you drive?: Short distances in limp mode only. Diagnose promptly.
Typical repair cost: £40-£150 for sensor/regulator work; £100-£350 per injector where back-leak is the cause.

Remanufactured diesel fuel injectors on a UK testing bench

UK's Leading Diesel Injector Specialists

Find the Exact Fuel Injector
by Vehicle Registration

UK diesel injector specialists supplying OEM tested and calibrated remanufactured injectors. Trusted by garages and mechanics nationwide with 12-month warranty on every part.

P0257 Injection Pump Metering Control B Low — Causes & Fix

What Does P0257 Mean?

P0257 at a Glance

Find the Exact Fuel Injectorby Vehicle Registration

Find the Exact Fuel Injector
by Vehicle Registration