EJBR03801D — Frequently Asked Questions
Verified answers about the Delphi EJBR03801D 2.0 HDi Common Rail Injector (Peugeot/Citroen DW10BTED4).
What is injector EJBR03801D?
EJBR03801D is a Delphi common rail solenoid injector diesel injector for the PSA 2.0 HDi (DW10BTED4 / RHR / RHA). It is supplied remanufactured, bench-tested and calibrated to OEM specification.
Which vehicles use EJBR03801D?
It is fitted to the PSA 2.0 HDi (DW10BTED4 / RHR / RHA) — including Peugeot 307 2.0 HDi 136 (DW10BTED4); Peugeot 407 2.0 HDi 136 (DW10BTED4); Peugeot 807 2.0 HDi 136 (DW10BTED4); Citroen C4 2.0 HDi 136 (DW10BTED4). Confirm fitment by OE number and engine code.
What type of injector is EJBR03801D?
It is a Delphi Common Rail Solenoid Injector. Always confirm the OEM markings on the injector body before fitting.
Does EJBR03801D need coding when fitted?
Yes — write the Delphi C2I classification code to the correct cylinder on fitment using Lexia/PP2000 (PSA) or Ford IDS.
What are the symptoms of a failing EJBR03801D?
Common signs are rough idle and vibration, hard starting, power loss or limp mode, black smoke and an engine-management light.
What causes these injectors to fail?
Most failures come from poor fuel filtration, contamination and water in the fuel leading to wear, high back-leakage and nozzle coking. Fix the cause before fitting replacements.
Is a remanufactured EJBR03801D as good as new?
A properly remanufactured injector is stripped, fitted with new wear parts, reassembled and recalibrated on a common-rail test bench to OEM tolerances, then supplied with a warranty.
Should I replace one injector or the full set?
Replace the confirmed faulty injector first. On high-mileage engines fitting a matched set reduces the chance of a repeat fault, but it is not mandatory if the others test within spec.
Do you bench-test the injector before dispatch?
Yes. Every unit is tested for delivery, back-leakage and spray pattern on a calibrated common-rail tester before it leaves us.
Is delivery and warranty included?
Yes — the price includes free UK delivery and a 12-month warranty.
Is the DW10BTED4 a Delphi or Siemens injector?
Both were fitted from factory: Delphi EJBR03801D and Siemens VDO 5WS40156Z. They are not interchangeable — read the OEM markings on the injector body before ordering.
What is the PSA OE number for EJBR03801D?
PSA OE 9656389980 (also seen as 1980S3/1980K3); the Delphi equivalent is R03801D.