Siemens VDO / Continental 563000110 Petrol Injector
3.0L Petrol Turbo · 563000110
Remanufactured Siemens VDO 563000110 piezo high-precision direct petrol injector for BMW N54B30A and N55B30A 3.0 turbo petrol engines, supplied to the latest index-12 specification (BMW 13537585261-12). Fits 1 Series 135i/M135i, 3 Series 335i, 4 Series 435i, 5 Series 535i, 7 Series 740i, X3/X5/X6 xDrive35i and Z4 sDrive35i. Direct replacement for BMW OE 13537537317, 13537565138, 13537585261, 13537625714 and 13538616079 (VDO A2C9521190280 / A2C6064074777). OEM-tested and calibrated with full flow and spray-pattern verification on CR318 PRO test bench. Includes 12-month unlimited-mileage warranty. Supplied as an exchange unit — return your old injector within 30 days.
2
Engine codes
13
OE / cross-refs
10
Vehicle fitments
12mo
Warranty
Common failure symptoms
On the 3.0L Petrol Turbo platform, a failing Siemens VDO 563000110 injector typically presents as: hard starting or extended cranking; rough or uneven idle; loss of power under load; excess smoke from the exhaust; cylinder misfire or contribution fault codes.
When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.
When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.
What Causes These Injectors To Fail
The documented failure modes on this platform are: injector back-leak beyond specification; nozzle wear degrading the spray pattern; combustion gas leaks past the injector seat washer.
Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.
How Workshops Diagnose 563000110 Faults
Run a comparative leak-off (back-leak) test across all injectors before condemning a single unit. Compare requested vs actual rail pressure in live data at idle and under load. Inspect injector connectors and wiring before replacing hardware.
Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.
How Every Unit Is Tested Before Despatch
Each remanufactured 563000110 is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.
Every unit carries a 12-month parts warranty and free UK delivery.
Vehicle Coverage At A Glance
The 563000110 trusted family covers 10 verified vehicle fitments across 1 make: BMW. Every fitment listed on this page is registry-verified — no scraped or assumed applications.
OE & Cross-References
563000110 supersedes or cross-references 12 further OE numbers, including A2C9521190280, A2C6064074777, 7537317, 7565138, 7585261, 7625714, 431110540 and 13537537317. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.
Related fault codes & engine guides
Trusted compatibility
Vehicle fitments
| Make | Model | Engine | Years |
|---|---|---|---|
| BMW | 1 Series (E82/E88) | 3.0 Twin Turbo 135i (N54/N55) | 2007–2013 |
| BMW | 3 Series (E90/E92/E93) | 3.0 Twin Turbo 335i (N54/N55) | 2006–2013 |
| BMW | 3 Series (F30/F31) | 3.0 Turbo 335i (N55B30A) | 2011–2015 |
| BMW | 4 Series (F32/F33) | 3.0 Turbo 435i (N55B30A) | 2013–2016 |
| BMW | 5 Series (F10/F11) | 3.0 Turbo 535i (N55B30A) | 2010–2016 |
| BMW | 7 Series (F01/F02) | 3.0 Twin Turbo 740i (N54/N55) | 2008–2015 |
| BMW | X3 (F25) | 3.0 Turbo xDrive35i (N55B30A) | 2010–2017 |
| BMW | X5 (E70/F15) | 3.0 Turbo xDrive35i (N55B30A) | 2010–2018 |
| BMW | X6 (E71/F16) | 3.0 Turbo xDrive35i (N55B30A) | 2010–2019 |
| BMW | Z4 (E89) | 3.0 Twin Turbo sDrive35i (N54B30A) | 2009–2016 |
Confirm fitment by registration
Enter your UK registration to verify your vehicle is in this trusted family. We'll cross-check the engine code against N54B30A / N55B30A.
Confirm fitment for your vehicle
Frequently asked
Related engine guides
Other Siemens VDO / Continental and same-platform injector families worth checking.
All cross-references in this family
Every reference below resolves to a PDP linked to this trusted family. 563000110, A2C9521190280, A2C6064074777, 7537317, 7565138, 7585261, 7625714, 431110540, 13537537317, 13537565138, 13537585261, 13537625714, 13538616079.
Siemens VDO / Continental know-how from the Knowledge Centre
Identification, coding, fitting and the mistakes that cause comebacks.