Delphi 28565339 Diesel Injector
2.0 BiTDI · 28565339
Delphi 28565339 (28654965 / HRD372) remanufactured DFI 1.20 common-rail diesel injector for the VW Transporter T6 2.0 BiTDI 150 kW (CXEB) and VW Crafter / MAN TGE 2.0 BiTDI 130 kW (DAWA). Replaces VW OE 03N130277D / 03N130277J / 03N130277M. Professionally tested and calibrated to OEM specification. Includes: OEM Tested, 12 Month Warranty, Free UK Delivery.
2
Engine codes
7
OE / cross-refs
2
Vehicle fitments
12mo
Warranty
Common failure symptoms
On the 2.0 BiTDI platform, a failing Delphi 28565339 injector typically presents as: hard starting or extended cranking; rough or uneven idle; loss of power under load; excess smoke from the exhaust; cylinder misfire or contribution fault codes.
When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.
When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.
What Causes These Injectors To Fail
The documented failure modes on this platform are: injector back-leak beyond specification; nozzle wear degrading the spray pattern; combustion gas leaks past the injector seat washer.
Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.
How Workshops Diagnose 28565339 Faults
Run a comparative leak-off (back-leak) test across all injectors before condemning a single unit. Compare requested vs actual rail pressure in live data at idle and under load. Inspect injector connectors and wiring before replacing hardware.
Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.
How Every Unit Is Tested Before Despatch
Each remanufactured 28565339 is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.
Every unit carries a 12-month parts warranty and free UK delivery.
Vehicle Coverage At A Glance
The 28565339 trusted family covers 2 verified vehicle fitments across 1 make: Volkswagen. Every fitment listed on this page is registry-verified — no scraped or assumed applications.
OE & Cross-References
28565339 supersedes or cross-references 6 further OE numbers, including 28654965, 28475606, 03N130277D, 03N130277J, 03N130277M and HRD372. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.
Related fault codes & engine guides
Trusted compatibility
OE / cross-references (6)
Vehicle fitments
| Make | Model | Engine | Years |
|---|---|---|---|
| Volkswagen | Transporter T6 | 2.0 BiTDI 150 kW (CXEB) | 2015–2019 |
| Volkswagen | Crafter | 2.0 BiTDI 130 kW (DAWA) | 2017–2024 |
Confirm fitment by registration
Enter your UK registration to verify your vehicle is in this trusted family. We'll cross-check the engine code against CXEB / DAWA.
Confirm fitment for your vehicle
Frequently asked
Related engine guides
Other Delphi and same-platform injector families worth checking.
All cross-references in this family
Every reference below resolves to a PDP linked to this trusted family. 28565339, 28654965, 28475606, 03N130277D, 03N130277J, 03N130277M, HRD372.
Delphi know-how from the Knowledge Centre
Identification, coding, fitting and the mistakes that cause comebacks.