Bosch 0445110476 Diesel Injector
VW/Audi/Seat/Skoda 1.6 TDI (EA288) · 0445110476
VW/Audi/Seat/Skoda 1.6 TDI (EA288) Remanufactured Common Rail Injector
6
Engine codes
5
OE / cross-refs
11
Vehicle fitments
12mo
Warranty
Common failure symptoms
On the VW/Audi/Seat/Skoda 1.6 TDI (EA288) platform, a failing Bosch 0445110476 injector typically presents as: hard starting or extended cranking; rough or uneven idle; loss of power under load; excess smoke from the exhaust; cylinder misfire or contribution fault codes.
When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.
When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.
What Causes These Injectors To Fail
The documented failure modes on this platform are: injector back-leak beyond specification; nozzle wear degrading the spray pattern; combustion gas leaks past the injector seat washer.
Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.
How Workshops Diagnose 0445110476 Faults
Run a comparative leak-off (back-leak) test across all injectors before condemning a single unit. Compare requested vs actual rail pressure in live data at idle and under load. Inspect injector connectors and wiring before replacing hardware.
Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.
How Every Unit Is Tested Before Despatch
Each remanufactured 0445110476 is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.
Every unit carries a 12-month parts warranty and free UK delivery.
Vehicle Coverage At A Glance
The 0445110476 trusted family covers 11 verified vehicle fitments across 4 makes: Audi, Seat, Skoda and Volkswagen. Every fitment listed on this page is registry-verified — no scraped or assumed applications.
OE & Cross-References
0445110476 supersedes or cross-references 4 further OE numbers, including 0445110477, 0986435241, 04L130277G and 04L130277AJ. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.
Related fault codes & engine guides
Trusted compatibility
OE / cross-references (4)
Confirm fitment by registration
Enter your UK registration to verify your vehicle is in this trusted family. We'll cross-check the engine code against CLHA / CLHB / CRKA and the rest of the cluster.
Confirm fitment for your vehicle
Frequently asked
Related engine guides
Other Bosch and same-platform injector families worth checking.
All cross-references in this family
Every reference below resolves to a PDP linked to this trusted family. 0445110476, 0445110477, 0986435241, 04L130277G, 04L130277AJ.
Bosch know-how from the Knowledge Centre
Identification, coding, fitting and the mistakes that cause comebacks.