Bosch 0445110551 Diesel Injector
2.0L TDI / BiTDI CR · 0445110551
Remanufactured Bosch 0445110551 common-rail diesel injector for the VW Crafter 2.0 TDI / 2.0 BiTDI (2011–2016) — engine codes CKTB, CKTC, CKUB, CKUC, CSLA, CSLB, CSLC, CSNA. Direct replacement for VW OE 03L130277P and Bosch cross-references 0445110550, 0986435276. OEM-tested and calibrated with full flow and leak-back verification on CR318 PRO test bench. Includes 12-month unlimited-mileage warranty. Supplied as an exchange unit — return your old injector within 30 days.
8
Engine codes
4
OE / cross-refs
3
Vehicle fitments
12mo
Warranty
Common failure symptoms
On the 2.0L TDI / BiTDI CR platform, a failing Bosch 0445110551 injector typically presents as: hard starting or extended cranking; rough or uneven idle; loss of power under load; excess smoke from the exhaust; cylinder misfire or contribution fault codes.
When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.
When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.
What Causes These Injectors To Fail
The documented failure modes on this platform are: injector back-leak beyond specification; nozzle wear degrading the spray pattern; combustion gas leaks past the injector seat washer.
Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.
How Workshops Diagnose 0445110551 Faults
Run a comparative leak-off (back-leak) test across all injectors before condemning a single unit. Compare requested vs actual rail pressure in live data at idle and under load. Inspect injector connectors and wiring before replacing hardware.
Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.
How Every Unit Is Tested Before Despatch
Each remanufactured 0445110551 is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.
Every unit carries a 12-month parts warranty and free UK delivery.
Vehicle Coverage At A Glance
The 0445110551 trusted family covers 3 verified vehicle fitments across 1 make: Volkswagen. Every fitment listed on this page is registry-verified — no scraped or assumed applications.
OE & Cross-References
0445110551 supersedes or cross-references 3 further OE numbers, including 0445110550, 0986435276 and 03L130277P. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.
Related fault codes & engine guides
Trusted compatibility
OE / cross-references (3)
Vehicle fitments
| Make | Model | Engine | Years |
|---|---|---|---|
| Volkswagen | Crafter 30-35 Bus (2E) | 2.0 TDI Common Rail (CKTB, CKTC, CSLA, CSLB, CSLC) | 2011–2016 |
| Volkswagen | Crafter 30-50 Van (2E) | 2.0 TDI / BiTDI Common Rail (CKTB–CSNA) | 2011–2016 |
| Volkswagen | Crafter 30-50 Platform/Chassis (2F) | 2.0 TDI / BiTDI Common Rail (CKUB, CKUC, CSNA) | 2011–2016 |
Confirm fitment by registration
Enter your UK registration to verify your vehicle is in this trusted family. We'll cross-check the engine code against CKTB / CKTC / CKUB and the rest of the cluster.
Confirm fitment for your vehicle
Frequently asked
Related engine guides
Other Bosch and same-platform injector families worth checking.
All cross-references in this family
Every reference below resolves to a PDP linked to this trusted family. 0445110551, 0445110550, 0986435276, 03L130277P.
Bosch know-how from the Knowledge Centre
Identification, coding, fitting and the mistakes that cause comebacks.