Bosch 044511113R Diesel Injector
2.2L · 044511113R
Remanufactured Bosch 044511113R (0445 111 13R) common-rail diesel injector for the Fiat 2.2 MultiJet 3 engine (FCA OE 46350501 / 0046350501 / 71799512, Mopar K0046350501; engine references 46349131 / 4H034HB). Fits Fiat Ducato (Series 8) 2.2 MultiJet 3 from 2021 onwards (120/140/160/180 hp variants). Latest-generation CRI2-20 solenoid unit. Fully tested and calibrated to OEM specification with 12 months warranty.
2
Engine codes
5
OE / cross-refs
1
Vehicle fitments
12mo
Warranty
Common failure symptoms
On the 2.2L platform, a failing Bosch 044511113R injector typically presents as: hard starting or extended cranking; rough or uneven idle; loss of power under load; excess smoke from the exhaust; cylinder misfire or contribution fault codes.
When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.
When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.
What Causes These Injectors To Fail
The documented failure modes on this platform are: injector back-leak beyond specification; nozzle wear degrading the spray pattern; combustion gas leaks past the injector seat washer.
Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.
How Workshops Diagnose 044511113R Faults
Run a comparative leak-off (back-leak) test across all injectors before condemning a single unit. Compare requested vs actual rail pressure in live data at idle and under load. Inspect injector connectors and wiring before replacing hardware.
Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.
How Every Unit Is Tested Before Despatch
Each remanufactured 044511113R is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.
Every unit carries a 12-month parts warranty and free UK delivery.
Vehicle Coverage At A Glance
The 044511113R trusted family covers 1 verified vehicle fitment across 1 make: Fiat. Every fitment listed on this page is registry-verified — no scraped or assumed applications.
OE & Cross-References
044511113R supersedes or cross-references 4 further OE numbers, including 46350501, 0046350501, K0046350501 and 71799512. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.
Related fault codes & engine guides
Trusted compatibility
OE / cross-references (4)
Vehicle fitments
| Make | Model | Engine | Years |
|---|---|---|---|
| Fiat | Ducato (Series 8) | 2.2 MultiJet 3 (120/140/160/180 hp) | 2021–present |
Confirm fitment by registration
Enter your UK registration to verify your vehicle is in this trusted family. We'll cross-check the engine code against 46349131 / 4H034HB.
Confirm fitment for your vehicle
Frequently asked
Related engine guides
Other Bosch and same-platform injector families worth checking.
All cross-references in this family
Every reference below resolves to a PDP linked to this trusted family. 044511113R, 46350501, 0046350501, K0046350501, 71799512.
Bosch know-how from the Knowledge Centre
Identification, coding, fitting and the mistakes that cause comebacks.