Skip to main content

Ships WorldwideFREE UK£50 International

Trade customer? Get Trade Pricing
OEM Tested
12-Month Warranty
Free UK Delivery
Same-Day Dispatch

23670-09350 — Technical Research

Denso solenoid common-rail injector for the Toyota 3.0 D-4D (engine 1KD-FTV) fitted to the Hilux, Land Cruiser Prado and Hiace. Toyota OE 23670-09350. Each injector carries a Denso correction/IQA code that must be programmed to the ECU with Toyota Techstream on fitment. The 1KD-FTV is sensitive to fuel filtration; failures are driven by contamination and back-leakage wear. Key symptoms: Rough idle / vibration; Hard starting; Loss of power / limp mode; Black smoke. Common failure modes: Internal wear / high back-leakage; Water-in-fuel corrosion; Nozzle coking.

Gold VerifiedVerified technical data

Denso 23670-09350 3.0 D-4D (1KD-FTV) Common Rail Injector (Toyota Hilux / Land Cruiser Prado / Hiace)

AI Technical Summary

Denso solenoid common-rail injector for the Toyota 3.0 D-4D (engine 1KD-FTV) fitted to the Hilux, Land Cruiser Prado and Hiace. Toyota OE 23670-09350. Each injector carries a Denso correction/IQA code that must be programmed to the ECU with Toyota Techstream on fitment. The 1KD-FTV is sensitive to fuel filtration; failures are driven by contamination and back-leakage wear. Key symptoms: Rough idle / vibration; Hard starting; Loss of power / limp mode; Black smoke. Common failure modes: Internal wear / high back-leakage; Water-in-fuel corrosion; Nozzle coking.

Common Symptoms
Rough idle / vibrationhigh

A leaking injector unbalances cylinder fuelling on the 1KD-FTV.

Hard startinghigh

Excess back-leakage drops cranking rail pressure.

Loss of power / limp modehigh

Out-of-range delivery or rail-pressure deviation cuts power.

Black smokemedium

Poor atomisation over-fuels the cylinder.

Engine management lightmedium

Cylinder-specific injector or fuel-metering codes.

Workshop & Fitting Notes
  • InstallationProgram the Denso correction/IQA code to the correct cylinder with Toyota Techstream before road test.
  • InstallationRenew the combustion seal and clamp hardware; torque to spec.
  • MisdiagnosisRead live back-leakage data to find the weak cylinder before removal.
  • WarningConfirm the OE number 23670-09350 stamped on the old injector; the 1KD-FTV is sensitive to fuel quality - fix contamination first.
  • TestingBench-test on a Denso-capable CR tester across delivery and back-leakage points before refit.
Frequently Asked Questions
What is Denso injector 23670-09350?+

A Denso solenoid common-rail diesel injector for the Toyota 3.0 D-4D (1KD-FTV) engine. Toyota OE 23670-09350.

Which vehicles use 23670-09350?+

Toyota Hilux, Land Cruiser Prado and Hiace with the 3.0 D-4D (1KD-FTV) engine, roughly 2003-2015.

Is it solenoid or piezo?+

It is a Denso solenoid common-rail injector.

Does 23670-09350 need coding?+

Yes - program the Denso correction/IQA code to the correct cylinder with Toyota Techstream when fitting.

What is the OE part number?+

Toyota 23670-09350 references this Denso 1KD-FTV injector.

Does it fit the 2.5 D-4D (2KD)?+

No - the 2.5 D-4D (2KD-FTV) uses a different injector. The 3.0 D-4D (1KD-FTV) uses 23670-09350; confirm the OE number stamped on your injector.

What are the symptoms of failure?+

Rough idle, vibration, hard starting, black smoke, power loss/limp mode and an EML.

Why does my 1KD-FTV run rough?+

A worn or leaking injector unbalances fuelling; read live back-leakage data and bench-test the weak cylinder.

What causes these injectors to fail?+

Poor fuel filtration, contamination and back-leakage wear - fix the cause first.

Does a remanufactured 23670-09350 perform like new?+

A properly remanufactured injector is bench-tested and recalibrated to the Denso plan, then correction-coded on fitment.

Related Injectors
Related Engines
1KD-FTV

Explore more