562002010 — Frequently Asked Questions
Verified answers about the Continental/Siemens VDO 562002010 2.3 dCi Common Rail Injector (Renault Master / Nissan NV400 / Vauxhall Movano M9T).
What is injector 562002010?
562002010 is a Siemens VDO / Continental common rail solenoid injector diesel injector for the Renault / Nissan 2.3 dCi (M9T, Euro 6). It is supplied remanufactured, bench-tested and calibrated to OEM specification.
Which vehicles use 562002010?
It is fitted to the Renault / Nissan 2.3 dCi (M9T, Euro 6) — including Renault Master III (phase 2) 2.3 dCi (M9T700/716); Nissan NV400 2.3 dCi (M9T702/716); Vauxhall/Opel Movano B 2.3 CDTi (M9T); Renault Master (twin-turbo 145/165) 2.3 dCi (M9T702). Confirm fitment by OE number and engine code.
What type of injector is 562002010?
It is a Siemens VDO / Continental Common Rail Solenoid Injector. Always confirm the OEM markings on the injector body before fitting.
Does 562002010 need coding when fitted?
Yes — code the C3I injector classification to the correct cylinder using Renault CLIP (or equivalent) on fitment.
What are the symptoms of a failing 562002010?
Common signs are rough idle and vibration, hard starting, power loss or limp mode, black smoke and an engine-management light.
What causes these injectors to fail?
Most failures come from poor fuel filtration, contamination and water in the fuel leading to wear, high back-leakage and nozzle coking. Fix the cause before fitting replacements.
Is a remanufactured 562002010 as good as new?
A properly remanufactured injector is stripped, fitted with new wear parts, reassembled and recalibrated on a common-rail test bench to OEM tolerances, then supplied with a warranty.
Should I replace one injector or the full set?
Replace the confirmed faulty injector first. On high-mileage engines fitting a matched set reduces the chance of a repeat fault, but it is not mandatory if the others test within spec.
Do you bench-test the injector before dispatch?
Yes. Every unit is tested for delivery, back-leakage and spray pattern on a calibrated common-rail tester before it leaves us.
Is delivery and warranty included?
Yes — the price includes free UK delivery and a 12-month warranty.
How is 562002010 different from 562001910?
Both are Continental/Siemens M9T 2.3 dCi injectors, but they are different part numbers for different M9T sub-variants/build periods. Match the exact number stamped on your injector and the OE reference before ordering.
Does 562002010 need coding?
Yes — the C3I injector classification code must be written to the correct cylinder with Renault CLIP (or equivalent) when fitting.