295050-1760 — Frequently Asked Questions
Verified answers about the Denso 295050-1760 Mitsubishi 4N15 2.4 DI-D Common Rail Injector (1465A439).
What is Denso injector 295050-1760?
A Denso common-rail diesel injector for the Mitsubishi 4N15 2.4 DI-D MIVEC engine. Mitsubishi OE 1465A439 (Denso reman reference DCRI301760).
Which vehicles use 295050-1760?
Mitsubishi L200/Triton (5th gen), Pajero Sport (QE/QF) and the rebadged Fiat Fullback with the 2.4 DI-D 4N15 engine, roughly 2015 onward.
Is it solenoid or piezo?
It is a Denso solenoid common-rail injector.
What is the Mitsubishi OE number for 295050-1760?
1465A439. Always confirm the number stamped on your original injector before ordering.
What are the symptoms of a failing 295050-1760?
Hard starting, rough idle and vibration, loss of power or limp mode, black smoke, diesel knock and higher fuel consumption.
Why does my Mitsubishi L200 2.4 DI-D knock or rattle?
A leaking injector causes a top-end knock on the 4N15 that is often most obvious at idle. Bench-test to confirm the faulty cylinder before replacing.
What causes these injectors to fail?
Fuel contamination, water in the fuel, nozzle coking and high-mileage internal wear that raises back-leakage - fix the cause, not just the injector.
Do I need to code the injector to the ECU?
Yes. Each Denso injector has an individual ID correction code that must be written into the ECU with MUT-III after fitting, or the engine runs on default trim and may log cylinder-balance faults.
Is 295050-1760 the same as the 2.5 4D56 injector?
No. 295050-1760 (OE 1465A439) is the 2.4 4N15 injector; the earlier 2.5 4D56 uses a different injector (1465A367 / DCRI300890). They are not interchangeable - match the stamped OE number.
Should I replace one or all four?
Diagnose each with live correction and back-leakage values; on high-mileage 4N15 engines failures often cluster, so check all four before deciding.
Does a remanufactured 295050-1760 perform like new?
A properly remanufactured injector is bench-tested and recalibrated to the Denso plan to meet original delivery and back-leakage specifications.
What is the Denso reman reference for 295050-1760?
DCRI301760 is the Denso remanufactured reference that corresponds to the 295050-1760 / Mitsubishi 1465A439 4N15 injector.