Skip to main content

Ships Worldwide•FREE UK•£50 International

Trade customer? Get Trade Pricing
OEM Tested
12-Month Warranty
Free UK Delivery
Same-Day Dispatch

N47C20A Diesel Injectors

Compatible with BMW 1 Series, BMW 2 Series, BMW 3 Series, and 3 more

  • OEM Tested & Calibrated
  • 12-Month Warranty
  • Free UK Delivery

Select the correct injector for your N47C20A engine below

Fits BMW 1 Series, BMW 2 Series, BMW 3 Series, BMW 4 Series and more

Compatible Injectors for N47C20A

  • OEM Tested
  • 12-Month Warranty
  • Free UK Delivery
Check CompatibilityCall 020 3355 6581
Order by 2pm — tracked UK courier

Common problems solved by these injectors

About the N47C20A engine

The N47C20A is a bmw 2.0d n47 common rail diesel engine. This engine uses Bosch diesel injectors.

How Diesel Injectors Are Remanufactured

Watch our 3D walkthrough of the diesel injector remanufacturing process and see how injectors are professionally restored for reliable service.

Vehicles Using N47C20A Engine

Common N47C20A Injector Problems

1

Rough idle and engine vibration

Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.

2

Excessive exhaust smoke

Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.

3

Poor fuel economy

A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.

4

Engine misfire under load

Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.

5

Difficult cold starting

Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

6

Loss of power

Gradual power loss across the rev range, particularly above 2500 RPM, can indicate injector flow rate degradation.

7

Increased diesel knock

Louder than normal combustion noise, especially at idle, can indicate incorrect injection timing due to worn injector internals.

N47C20A Technical Specifications

Displacement

—

Power

—

Torque

—

Fuel System

Common Rail Direct Injection

The N47C20A is a bmw 2.0d n47 common rail diesel engine. This engine uses Bosch diesel injectors.

Engine Intelligence

BMW 2.0 Diesel

Diagnostic guidance

  • Check injector correction values before replacement
  • Coding is usually required after fitting
  • Confirm solenoid/piezo injector type before ordering

Fitment note: N47 engines may use different Bosch injector types depending on year and output.

Browse every diesel engine we cover →

Related N47C20A Engine Guides

Related Pages

Bosch BMW 2.0d N47 — browse compatible engines, vehicles, and injectors

More resources for N47C20A owners