Skip to main content

Ships Worldwide•FREE UK•£50 International

Trade customer? Get Trade Pricing
OEM Tested
12-Month Warranty
Free UK Delivery
Same-Day Dispatch

8HR Diesel Injectors

Compatible with Citroen C3, Ford Fiesta, Peugeot 207, and 2 more

  • OEM Tested & Calibrated
  • 12-Month Warranty
  • Free UK Delivery

Select the correct injector for your 8HR engine below

Fits Citroen C3, Ford Fiesta, Peugeot 207, Peugeot 208 and more

Compatible Injectors for 8HR

  • OEM Tested
  • 12-Month Warranty
  • Free UK Delivery
Check CompatibilityCall 020 3355 6581
Order by 2pm — tracked UK courier

Common problems solved by these injectors

About the 8HR engine

The 8HR is a 1.4l hdi/tdci common rail diesel engine. This engine uses Bosch diesel injectors.

How Diesel Injectors Are Remanufactured

Watch our 3D walkthrough of the diesel injector remanufacturing process and see how injectors are professionally restored for reliable service.

Vehicles Using 8HR Engine

VehicleEngineYears
Citroen C3 injector 1.4 HDi2009–2016
Ford Fiesta injector 1.4 TDCi2009–2017
Peugeot 207 injector 1.4 HDi2006–2014
Peugeot 208 injector 1.4 HDi2012–2015
Peugeot 308 injector 1.4 HDi2007–2013

Common 8HR Injector Problems

1

Rough idle and engine vibration

Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.

2

Excessive exhaust smoke

Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.

3

Poor fuel economy

A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.

4

Engine misfire under load

Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.

5

Difficult cold starting

Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

6

Loss of power

Gradual power loss across the rev range, particularly above 2500 RPM, can indicate injector flow rate degradation.

7

Increased diesel knock

Louder than normal combustion noise, especially at idle, can indicate incorrect injection timing due to worn injector internals.

8HR Technical Specifications

Displacement

—

Power

—

Torque

—

Fuel System

Common Rail Direct Injection

The 8HR is a 1.4l hdi/tdci common rail diesel engine. This engine uses Bosch diesel injectors.

Engine Intelligence

PSA / Ford / Toyota 1.4 HDi / TDCi / D-4D (DV4)

Documented failure modes

  • Nozzle wear causing over-fuelling
  • Injector back-leak out of specification
  • Carbon build-up at the injector seat causing compression leaks

Diagnostic guidance

  • Compare leak-off volumes across all four injectors to isolate the faulty unit
  • Keep the fuel system scrupulously clean during work — small common-rail systems are highly sensitive to debris
  • Clean the injector seat and fit a new sealing washer on every refit

Fault codes linked to this engine's injectors

Fitment note: The DV4 1.4 was built with BOTH Bosch (8HP/8HR) and Siemens (8HX/8HZ/8HT, Ford F6JA/F6JB) injection systems — they are not interchangeable. Always confirm the etched part number.

Browse every diesel engine we cover →

Related 8HR Engine Guides

Related Pages

Bosch 1.4L HDi/TDCi — browse compatible engines, vehicles, and injectors

More resources for 8HR owners