Volkswagen Touran BMR Injectors

Volkswagen Touran BMR Overview

The Volkswagen Touran with the BMR 2.0L TDI PD engine was produced between 2005 and 2010. This vehicle uses Siemens VDO / Continental common rail diesel injectors (primary part number 03G130073S) operating at fuel pressures up to 2000 bar. The BMR engine in the Volkswagen Touran produces and of torque. When replacing injectors on the Volkswagen Touran BMR, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Volkswagen Touran

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Volkswagen Touran

Other BMR Vehicles

Related Pages

Siemens VDO / Continental 2.0L TDI PD — browse compatible engines, vehicles, and injectors