Which engines use the Delphi EJDR01001D injector?

EJDR01001D is verified for the 2.0L TDCi platform, covering engine code FIFA. Confirm the engine code on your V5C before ordering.

Which vehicles does EJDR01001D fit?

This family has 1 verified fitment across Ford — the full registry-verified list is on this page.

My injector is etched with a different number — is it the same part?

EJDR01001D cross-references R01001D, HRD330, R00401Z, R00201Z, EJDR00401Z and EJDR00201Z among others. If your etched number appears in this family's reference list it is a verified equivalent; if not, send us a photo of the etching and we will confirm before you order.

Do I need to code the replacement injector to the ECU?

Yes on common-rail diesels. Every injector ships with an individual calibration code that must be written to the ECU after fitting, following the manufacturer procedure — without it the engine runs on default trims and can log cylinder-balance faults.

How is each injector tested before despatch?

Every unit is bench-calibrated against the manufacturer specification — delivery, back-leak and response verified — and despatched with a 12-month parts warranty and its calibration data retained on file.

Trusted FamilyDelphiRemanufactured

Delphi EJDR01001D Diesel Injector

Name: Delphi EJDR01001D Remanufactured Diesel Injector
Brand: Delphi
SKU: EJDR01001D
Price: 100.00 GBP
Availability: InStock

2.0L TDCi · EJDR01001D

Remanufactured Delphi EJDR01001D diesel injector for Ford Mondeo and Transit 2.0 TDCi applications. Direct replacement cross-referencing 2C1Q-9K546-BA, R01001D, HRD330, 1376692, 1434987. Fits FMBA, FMBB, N7BA, N7BB and FIFA engine codes. OEM-tested and calibrated with full flow and leak-back verification on CR318 PRO test bench. Includes 12-month unlimited-mileage warranty. Supplied as an exchange unit — return your old injector within 30 days.

Engine codes

OE / cross-refs

Vehicle fitments

12mo

Warranty

Common failure symptoms

On the 2.0L TDCi platform, a failing Delphi EJDR01001D injector typically presents as: hot-start failure or very long cranking when warm; cold-start rattle / injector knock; misfire and uneven running at idle; black smoke under acceleration; cutting out at junctions when hot.

When two or more of these appear together, suspect the injector before peripheral systems — a comparative leak-off test and live-data cylinder-balance review will isolate the failed unit without tear-down.

When two or more symptoms appear together, suspect the injector before peripherals (EGR, glow plugs, turbo). A live-data leak-off test on each cylinder is the fastest route to the failed unit.

What Causes These Injectors To Fail

The documented failure modes on this platform are: excessive injector back-leak preventing rail pressure build when hot (classic delphi ejdr failure); worn injector internals causing combustion knock; low-pressure fuel supply aeration compounding hot-start faults.

Internal wear cannot be repaired in situ — once delivery drifts outside calibration, remanufacture or replacement is the reliable fix.

How Workshops Diagnose EJDR01001D Faults

A warm-engine leak-off test is the decisive diagnostic on this family — cold tests can pass a failing injector. Delphi injectors are calibrated: the new injector's calibration code must be programmed at fitting. Check the low-pressure supply and lift pump before condemning injectors. Label leak-off pipes before removal to avoid cross-connection.

Never condemn a common-rail injector on a fault code alone — codes identify the circuit or cylinder, while leak-off volumes and correction values identify the component.

How Every Unit Is Tested Before Despatch

Each remanufactured EJDR01001D is fully stripped, ultrasonically cleaned and inspected; worn components are replaced with OE-grade parts. The rebuilt unit is then calibrated on a common-rail test bench against the manufacturer's specification sheet — delivery, back-leak and response are all verified before the injector is sealed and despatched with its calibration data on file.

Every unit carries a 12-month parts warranty and free UK delivery.

Vehicle Coverage At A Glance

The EJDR01001D trusted family covers 1 verified vehicle fitment across 1 make: Ford. Every fitment listed on this page is registry-verified — no scraped or assumed applications.

OE & Cross-References

EJDR01001D supersedes or cross-references 23 further OE numbers, including R01001D, HRD330, R00401Z, R00201Z, EJDR00401Z, EJDR00201Z, AR01001D and XR01001D. Always match the reference etched on your failed unit's body — cross-references within a family are verified equivalents, but etched numbers remain the source of truth.