Hyundai Santa Fe (SM / CM) D4EA Injectors

2.0L CRDi | 2001–2009

Engine Code

D4EA

Engine Size

2.0L CRDi

Production

2001–2009

Hyundai Santa Fe (SM / CM) D4EA Overview

The Hyundai Santa Fe (SM / CM) with the D4EA 2.0L CRDi engine was produced between 2001 and 2009. This vehicle uses BOSCH common rail diesel injectors (primary part number 0445110064) operating at fuel pressures up to 2000 bar. The D4EA engine in the Hyundai Santa Fe (SM / CM) produces and of torque. When replacing injectors on the Hyundai Santa Fe (SM / CM) D4EA, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

BOSCH 0445110064

0445110064 | 0445110101 | 0986435094 | 33800-27010 | 3380027010

£120 inc. VAT

View injector

Common Injector Problems in Hyundai Santa Fe (SM / CM)

•
Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
•
Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
•
Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
•
Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
•
Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other D4EA Vehicles

Hyundai Trajet

2001–2008

Hyundai Tucson (JM)

2004–2010

Hyundai Elantra (XD)

2001–2006

Kia Sportage (JE / KM)

2004–2010

Kia Carens (UN)

2002–2006

View all D4EA compatible vehicles and injectors

BOSCH 2.0L CRDi — browse compatible engines, vehicles, and injectors

Compatible Engines

D4EA Engine

Compatible Vehicles

Recommended Injector

0445110064

BOSCH — View product page

OEM Part Numbers

0445110101 0986435094 33800-27010 3380027010 33800-27000 3380027000 33800-27900 3380027900

Diesel Injector Knowledge Centre

Remanufactured, Reconditioned or Refurbished Diesel Injectors — What We Supply

Whether you searched for remanufactured, reconditioned or refurbished diesel injectors, the product here is the same: a professionally remanufactured injector, not a cleaned-up used part. Each unit is dismantled, inspected against the manufacturer's test plan, worn components such as nozzles and control valves are replaced where the bench results call for it, then it is calibrated, tested and supplied ready to fit with its coding data. We remanufacture in-house in the UK and deliver nationwide.

Is a reconditioned injector the same as a remanufactured one?

In UK trade language the terms are used interchangeably. What matters is the process: our injectors are fully remanufactured — dismantled, worn parts replaced where required, recalibrated on the test bench and covered by a 12-month warranty — rather than simply cleaned and resold.