N57D30A Diesel Injectors
Compatible with BMW 5 Series, BMW 7 Series, BMW X3, and 2 more
- OEM Tested & Calibrated
- 12-Month Warranty
- Free UK Delivery
Select the correct injector for your N57D30A engine below
Fits BMW 5 Series, BMW 7 Series, BMW X3, BMW X5 and more
Top injectors for N57D30A
Compatible Injectors for N57D30A
- OEM Tested
- 12-Month Warranty
- Free UK Delivery
Common problems solved by these injectors
About the N57D30A engine
The N57D30A is a bmw n47/n57 2.0/3.0 d common rail diesel engine. This engine uses Bosch diesel injectors.
How Diesel Injectors Are Remanufactured
Watch our 3D walkthrough of the diesel injector remanufacturing process and see how injectors are professionally restored for reliable service.
Vehicles Using N57D30A Engine
| Vehicle | Engine | Years |
|---|---|---|
| BMW 5 Series injector | 3.0 Diesel | 2010–2017 |
| BMW 7 Series injector | 3.0 Diesel | 2009–2015 |
| BMW X3 injector | 3.0 Diesel | 2010–2017 |
| BMW X5 injector | 3.0 Diesel | 2010–2018 |
| BMW X6 injector | 3.0 Diesel | 2010–2014 |
Common N57D30A Injector Problems
Rough idle and engine vibration
Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
Excessive exhaust smoke
Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
Poor fuel economy
A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
Engine misfire under load
Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
Difficult cold starting
Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.
Loss of power
Gradual power loss across the rev range, particularly above 2500 RPM, can indicate injector flow rate degradation.
Increased diesel knock
Louder than normal combustion noise, especially at idle, can indicate incorrect injection timing due to worn injector internals.
N57D30A Technical Specifications
Displacement
—
Power
—
Torque
—
Fuel System
Common Rail Direct Injection
The N57D30A is a bmw n47/n57 2.0/3.0 d common rail diesel engine. This engine uses Bosch diesel injectors.
Engine Intelligence
BMW 3.0d (N57 — Euro 5/6, F-series 330d/530d/730d, X5, X6)
Documented failure modes
- Injector back-leak beyond specification, most evident warm
- Nozzle coking on short-journey duty cycles
- Injector circuit faults from loom or connector damage
Diagnostic guidance
- Injector quantity-adjustment values must be written following the manufacturer procedure after fitting
- Compare per-cylinder smooth-running values in live data before removing any injector
- Verify low-pressure fuel supply before attributing rail-pressure faults to injectors
Fitment note: N47 four-cylinder and N57 six-cylinder cars of the same era use closely related but different Bosch references — always confirm the number etched on the injector body.
Related N57D30A Engine Guides
Related Pages
Bosch BMW N47/N57 2.0/3.0 D — browse compatible engines, vehicles, and injectors
