Skip to main content

Ships Worldwide•FREE UK•£50 International

Trade customer? Get Trade Pricing
OEM Tested
12-Month Warranty
Free UK Delivery
Same-Day Dispatch

M9T702 Diesel Injectors

Compatible with Nissan Interstar, Nissan NV400, Renault Master, and 1 more

  • OEM Tested & Calibrated
  • 12-Month Warranty
  • Free UK Delivery

Select the correct injector for your M9T702 engine below

Fits Nissan Interstar, Nissan NV400, Renault Master, Vauxhall Movano and more

Compatible Injectors for M9T702

  • OEM Tested
  • 12-Month Warranty
  • Free UK Delivery
Check CompatibilityCall 020 3355 6581
Order by 2pm — tracked UK courier

Common problems solved by these injectors

About the M9T702 engine

The M9T702 is a renault / nissan 2.3 dci (m9t) common rail diesel engine. This engine uses Siemens VDO / Continental diesel injectors.

How Diesel Injectors Are Remanufactured

Watch our 3D walkthrough of the diesel injector remanufacturing process and see how injectors are professionally restored for reliable service.

Vehicles Using M9T702 Engine

VehicleEngineYears
Nissan Interstar injector dCi2021 Onwards
Nissan NV400 injector dCi2014 Onwards
Renault Master injector 2.3 dCi2012 Onwards
Vauxhall Movano injector 2.3 CDTI2014 Onwards

Common M9T702 Injector Problems

1

Rough idle and engine vibration

Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.

2

Excessive exhaust smoke

Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.

3

Poor fuel economy

A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.

4

Engine misfire under load

Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.

5

Difficult cold starting

Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

6

Loss of power

Gradual power loss across the rev range, particularly above 2500 RPM, can indicate injector flow rate degradation.

7

Increased diesel knock

Louder than normal combustion noise, especially at idle, can indicate incorrect injection timing due to worn injector internals.

M9T702 Technical Specifications

Displacement

—

Power

—

Torque

—

Fuel System

Common Rail Direct Injection

The M9T702 is a renault / nissan 2.3 dci (m9t) common rail diesel engine. This engine uses Siemens VDO / Continental diesel injectors.

Engine Intelligence

Renault / Vauxhall / Nissan 2.3 dCi (M9T — Master, Movano, NV400)

Documented failure modes

  • Injector back-leak beyond specification
  • Nozzle carbon build-up degrading spray pattern
  • Combustion gas leaks past the injector seat washer (black soot around injector)
  • Connector corrosion in high-duty van cycles

Diagnostic guidance

  • Record leak-off volumes across all four injectors before ordering — condemn on comparison, not guesswork
  • Check for combustion blow-by (chuffing / soot) around injector seats
  • Replace seals and washers on every injector removed
  • Injector codes must be programmed following the manufacturer procedure after fitting

Fault codes linked to this engine's injectors

Fitment note: M9T variants (678/680/694/700/702…) share the 2.3 dCi platform but injector part numbers differ by output and emissions stage — confirm the number etched on the injector body.

Browse every diesel engine we cover →

Related M9T702 Engine Guides

Related Pages

Siemens VDO / Continental Renault / Nissan 2.3 dCi (M9T) — browse compatible engines, vehicles, and injectors

More resources for M9T702 owners