Skip to main content

Ships Worldwide•FREE UK•£50 International

Trade customer? Get Trade Pricing
OEM Tested
12-Month Warranty
Free UK Delivery
Same-Day Dispatch

RF5C Diesel Injectors

Compatible with Mazda 6 (GG/GY), Mazda MPV II (LW)

  • OEM Tested & Calibrated
  • 12-Month Warranty
  • Free UK Delivery

Select the correct injector for your RF5C engine below

Fits Mazda 6 (GG/GY), Mazda MPV II (LW) and more

Compatible Injectors for RF5C

  • OEM Tested
  • 12-Month Warranty
  • Free UK Delivery
Check CompatibilityCall 020 3355 6581
Order by 2pm — tracked UK courier

Common problems solved by these injectors

About the RF5C engine

The RF5C is a 2.0l common rail diesel engine. This engine uses DENSO diesel injectors.

How Diesel Injectors Are Remanufactured

Watch our 3D walkthrough of the diesel injector remanufacturing process and see how injectors are professionally restored for reliable service.

Vehicles Using RF5C Engine

VehicleEngineYears
Mazda 6 (GG/GY) injector 2.0L2002–2007
Mazda MPV II (LW) injector 2.0L2002–2006

Common RF5C Injector Problems

1

Rough idle and engine vibration

Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.

2

Excessive exhaust smoke

Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.

3

Poor fuel economy

A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.

4

Engine misfire under load

Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.

5

Difficult cold starting

Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

6

Loss of power

Gradual power loss across the rev range, particularly above 2500 RPM, can indicate injector flow rate degradation.

7

Increased diesel knock

Louder than normal combustion noise, especially at idle, can indicate incorrect injection timing due to worn injector internals.

RF5C Technical Specifications

Displacement

—

Power

—

Torque

—

Fuel System

Common Rail Direct Injection

The RF5C is a 2.0l common rail diesel engine. This engine uses DENSO diesel injectors.

Engine Intelligence

Mazda 2.0 MZR-CD (RF5C / RF7J — Denso)

Documented failure modes

  • Injector leak-back beyond specification
  • Nozzle wear causing over-fuelling and oil dilution
  • Seat washer combustion leaks

Diagnostic guidance

  • Check the oil level for diesel dilution — a documented consequence of worn injectors on this engine
  • Compare leak-off volumes across all four injectors before ordering
  • Denso compensation codes must be registered via the manufacturer diagnostic procedure after fitting

Fault codes linked to this engine's injectors

Fitment note: RF5C (136) and RF7J (143) builds of the MZR-CD use different Denso references — confirm the DCRI / 095000 number etched on the injector.

Browse every diesel engine we cover →

Related RF5C Engine Guides

More resources for RF5C owners