Skip to main content

Ships Worldwide•FREE UK•£50 International

Trade customer? Get Trade Pricing
OEM Tested
12-Month Warranty
Free UK Delivery
Same-Day Dispatch

256D2 Diesel Injectors

Compatible with BMW 1 Series (E87), BMW 3 Series (E46), BMW 3 Series (E90/E91), and 2 more

  • OEM Tested & Calibrated
  • 12-Month Warranty
  • Free UK Delivery

Select the correct injector for your 256D2 engine below

Fits BMW 1 Series (E87), BMW 3 Series (E46), BMW 3 Series (E90/E91), BMW 5 Series (E60/E61) and more

Compatible Injectors for 256D2

  • OEM Tested
  • 12-Month Warranty
  • Free UK Delivery
Check CompatibilityCall 020 3355 6581
Order by 2pm — tracked UK courier

Common problems solved by these injectors

About the 256D2 engine

The 256D2 is a 2.0d common rail diesel engine. This engine uses Bosch diesel injectors.

How Diesel Injectors Are Remanufactured

Watch our 3D walkthrough of the diesel injector remanufacturing process and see how injectors are professionally restored for reliable service.

Vehicles Using 256D2 Engine

Common 256D2 Injector Problems

1

Rough idle and engine vibration

Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.

2

Excessive exhaust smoke

Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.

3

Poor fuel economy

A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.

4

Engine misfire under load

Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.

5

Difficult cold starting

Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

6

Loss of power

Gradual power loss across the rev range, particularly above 2500 RPM, can indicate injector flow rate degradation.

7

Increased diesel knock

Louder than normal combustion noise, especially at idle, can indicate incorrect injection timing due to worn injector internals.

256D2 Technical Specifications

Displacement

—

Power

—

Torque

—

Fuel System

Common Rail Direct Injection

The 256D2 is a 2.0d common rail diesel engine. This engine uses Bosch diesel injectors.

Engine Intelligence

BMW 2.0d (M47TU2 — 256D2, E46 320d, E90, E60, X3)

Documented failure modes

  • Injector internal leakage (high leak-back) preventing rail pressure from building
  • Injector imbalance showing as uneven cylinder correction values
  • Injector seal / washer leakage with soot or fuel around the injector base

Diagnostic guidance

  • Rule out air leaks and fuel-supply faults first — they mimic injector failure on the M47
  • Compare requested vs actual rail pressure in live data before condemning injectors
  • Run an injector leak-back test to spot excessive internal leakage
  • Check injector correction / smooth-running values where the scan tool supports it

Fault codes linked to this engine's injectors

Fitment note: BMW 2.0d engines span M47, M47TU and M47TU2 generations with different Bosch references — the 256D2 code alone is not enough; match the number etched on the injector body.

Browse every diesel engine we cover →

Related 256D2 Engine Guides

Related Pages

Bosch 2.0d — browse compatible engines, vehicles, and injectors

More resources for 256D2 owners