Skip to main content

Ships WorldwideFREE UK£50 International

Trade customer? Get Trade Pricing
OEM Tested
12-Month Warranty
Free UK Delivery
Same-Day Dispatch

204D4 Diesel Injectors

Compatible with BMW 1 Series (E87), BMW 3 Series (E90/E91), BMW 5 Series (E60/E61), and 2 more

  • OEM Tested & Calibrated
  • 12-Month Warranty
  • Free UK Delivery

Select the correct injector for your 204D4 engine below

Fits BMW 1 Series (E87), BMW 3 Series (E90/E91), BMW 5 Series (E60/E61), BMW X3 (E83) and more

Compatible Injectors for 204D4

  • OEM Tested
  • 12-Month Warranty
  • Free UK Delivery
Common replacements fitted to BMW 1 Series (E87)

Each link opens the product page with full fitment, pricing and warranty information.

Check CompatibilityCall 020 3355 6581
Order by 2pm — tracked UK courier

Common problems solved by these injectors

About the 204D4 engine

The 204D4 is a 2.0l/3.0l diesel common rail diesel engine. This engine uses Bosch diesel injectors.

How Diesel Injectors Are Remanufactured

Watch our 3D walkthrough of the diesel injector remanufacturing process and see how injectors are professionally restored for reliable service.

Vehicles Using 204D4 Engine

Common 204D4 Injector Problems

1

Rough idle and engine vibration

Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.

2

Excessive exhaust smoke

Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.

3

Poor fuel economy

A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.

4

Engine misfire under load

Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.

5

Difficult cold starting

Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

6

Loss of power

Gradual power loss across the rev range, particularly above 2500 RPM, can indicate injector flow rate degradation.

7

Increased diesel knock

Louder than normal combustion noise, especially at idle, can indicate incorrect injection timing due to worn injector internals.

204D4 Technical Specifications

Displacement

Power

Torque

Fuel System

Common Rail Direct Injection

The 204D4 is a 2.0l/3.0l diesel common rail diesel engine. This engine uses Bosch diesel injectors.

Engine Intelligence

BMW / Land Rover 2.0 TD4 (M47R — Freelander Td4, E46 318d/320d era)

Documented failure modes

  • Injector back-leak beyond specification
  • Nozzle wear on high-mileage units
  • Electrical connector faults causing intermittent circuit codes

Diagnostic guidance

  • Verify the low-pressure delivery and filter condition before attributing faults to injectors on this platform
  • Run a comparative leak-off test across all four injectors
  • Inspect injector wiring and connectors — age-related loom faults mimic injector failure

Fault codes linked to this engine's injectors

Fitment note: The M47-family 2.0 TD4 spans BMW and Land Rover applications with different Bosch references by year — always match the number etched on the injector body.

Browse every diesel engine we cover →

Related 204D4 Engine Guides

Related Pages

Bosch 2.0L/3.0L Diesel — browse compatible engines, vehicles, and injectors

More resources for 204D4 owners