BMM Injector Problems – Symptoms, Causes & Fixes

Engine: BMM 57 compatible injectors From £100

Common Injector Failures on the BMM

The BMM engine uses high-pressure common rail diesel injection. Over time, injector nozzles wear, seals degrade, and internal components lose calibration. This leads to a range of drivability symptoms that worsen if left unaddressed. We stock 57 tested replacement injectors for this engine from Bosch.

Vehicles fitted with the BMM include models from AUDI, Audi. If you are experiencing any of the symptoms below, your injectors may need testing or replacement.

Symptoms of Injector Failure

Related Fault Codes

P0201 P0202 P0203 P0204 P0263 P0266 P0269 P0087 P0089 P0300

How to Test BMM Injectors

Leak-off test: Connect clear hoses to the injector return lines and compare fuel volumes at idle. The injector returning the most fuel is likely worn.

Correction values: Use a scan tool to read injector correction (IMA) values. Readings beyond ±3 mg/stroke indicate wear.

Resistance check: Measure resistance across the injector connector pins with a multimeter. Compare to manufacturer specs.

Complete Testing Guide Leak-Off Test Guide

BMM Injector Replacement Cost

Parts (per injector)

£100–£150

Labour

£150–£400

Total (per injector)

£250–£550

Full replacement cost guide

Compatible Injectors for the BMM57 found

Most Common Injector Part Numbers for BMM Engine

Related Cross Reference Numbers for BMM

038130073AA 038130073AL 038130073BJ 038130073G 038130079BX 038130079QX 03G130073G 03G130073GX

Vehicles Using the BMM Engine

Related Engine Codes

1T1 1T2 2000 2003 2004 8E2

Frequently Asked Questions

What are common injector problems on the BMM engine?

The BMM engine commonly suffers from injector seal failure, nozzle wear causing poor spray patterns, and back-leak issues. Symptoms include rough idle, black or white exhaust smoke, hard starting, and increased fuel consumption. These issues typically appear after 100,000–150,000 miles.

How much does it cost to replace injectors on a BMM engine?

A remanufactured injector for the BMM engine typically costs £100–£150 per injector. Labour adds £150–£400 depending on accessibility. We found 57 compatible injectors for this engine.

Which vehicles use the BMM engine?

The BMM engine is found in vehicles from AUDI, Audi. Common models include AUDI A1, AUDI A3, AUDI A4, AUDI A6, Audi A3.

How do I test the injectors on a BMM engine?

Perform a leak-off test by connecting clear hoses to each injector return line and comparing fuel volumes at idle. You can also check injector correction values with a diagnostic scan tool or measure electrical resistance with a multimeter.

Injector Compatibility Checker

Explore Related Content

Diagnostic Guides

Related Vehicles

Need a Replacement BMM Injector?

We stock 57 tested replacement injectors for the BMM engine. All remanufactured, bench-tested, and supplied with a 12-month warranty.

View All Injectors Replacement Cost Guide Call 020 3355 6581