Dacia Dokker K9K636 Injectors

Dacia Dokker K9K636 Overview

The Dacia Dokker with the K9K636 1.5L dCi/CDI engine was produced between 2013 and 2020. This vehicle uses Siemens VDO / Continental common rail diesel injectors (primary part number H8201100113) operating at fuel pressures up to 2000 bar. The K9K636 engine in the Dacia Dokker produces and of torque. When replacing injectors on the Dacia Dokker K9K636, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Dacia Dokker

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Dacia Dokker

Other K9K636 Vehicles

Related Pages

Siemens VDO / Continental 1.5L dCi/CDI — browse compatible engines, vehicles, and injectors