Audi A3 BKP Injectors

Audi A3 BKP Overview

The Audi A3 with the BKP 2.0L TDI PD engine was produced between 2004 and 2009. This vehicle uses Siemens VDO / Continental common rail diesel injectors (primary part number 03G130073S) operating at fuel pressures up to 2000 bar. The BKP engine in the Audi A3 produces and of torque. When replacing injectors on the Audi A3 BKP, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Audi A3

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Audi A3

Other BKP Vehicles

Related Pages

Siemens VDO / Continental 2.0L TDI PD — browse compatible engines, vehicles, and injectors