Peugeot 407 4HP Injectors

Peugeot 407 4HP Overview

The Peugeot 407 with the 4HP 2.2L HDi / TDCi engine was produced between 2006 and 2011. This vehicle uses Bosch common rail diesel injectors (primary part number 0445115025) operating at fuel pressures up to 2000 bar. The 4HP engine in the Peugeot 407 produces and of torque. When replacing injectors on the Peugeot 407 4HP, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Peugeot 407

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Peugeot 407

Other 4HP Vehicles

Related Pages

Bosch 2.2L HDi / TDCi — browse compatible engines, vehicles, and injectors