Opel / Vauxhall Vectra C / Signum Y30DT Injectors

3.0L | 2003–2005

Engine Code

Y30DT

Engine Size

3.0L

Production

2003–2005

Opel / Vauxhall Vectra C / Signum Y30DT Overview

The Opel / Vauxhall Vectra C / Signum with the Y30DT 3.0L engine was produced between 2003 and 2005. This vehicle uses DENSO common rail diesel injectors (primary part number DCRI100360) operating at fuel pressures up to 2000 bar. The Y30DT engine in the Opel / Vauxhall Vectra C / Signum produces and of torque. When replacing injectors on the Opel / Vauxhall Vectra C / Signum Y30DT, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

DENSO DCRI100360

DCRI100360 | 095000-0366 | 0950000366 | 5821085 | 97239161

£140 inc. VAT

View injector

Common Injector Problems in Opel / Vauxhall Vectra C / Signum

•
Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
•
Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
•
Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
•
Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
•
Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

View all Y30DT compatible vehicles and injectors

DENSO 3.0L — browse compatible engines, vehicles, and injectors

Compatible Engines

P9X701 Engine D308L Engine Y30DT Engine

Compatible Vehicles

Recommended Injector

DCRI100360

DENSO — View product page

OEM Part Numbers

095000-0366 0950000366 5821085 97239161 7701477687 8-97239161-0 8-97239161-1 8-97239161-2 8-97239161-3 8-97239161-4

Diesel Injector Knowledge Centre

Remanufactured, Reconditioned or Refurbished Diesel Injectors — What We Supply

Whether you searched for remanufactured, reconditioned or refurbished diesel injectors, the product here is the same: a professionally remanufactured injector, not a cleaned-up used part. Each unit is dismantled, inspected against the manufacturer's test plan, worn components such as nozzles and control valves are replaced where the bench results call for it, then it is calibrated, tested and supplied ready to fit with its coding data. We remanufacture in-house in the UK and deliver nationwide.

Is a reconditioned injector the same as a remanufactured one?

In UK trade language the terms are used interchangeably. What matters is the process: our injectors are fully remanufactured — dismantled, worn parts replaced where required, recalibrated on the test bench and covered by a 12-month warranty — rather than simply cleaned and resold.