Mitsubishi L200 4M41 Injectors

Mitsubishi L200 4M41 Overview

The Mitsubishi L200 with the 4M41 3.2 DI-D (4M41) engine was produced between 2006 and 2015. This vehicle uses DENSO common rail diesel injectors (primary part number DCRI105600) operating at fuel pressures up to 2000 bar. The 4M41 engine in the Mitsubishi L200 produces and of torque. When replacing injectors on the Mitsubishi L200 4M41, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Mitsubishi L200

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other 4M41 Vehicles

Related Pages

DENSO 3.2 DI-D (4M41) — browse compatible engines, vehicles, and injectors