DFMA Diesel Injectors
Compatible with Audi A3, Audi A4, Audi A5, and 21 more
- OEM Tested & Calibrated
- 12-Month Warranty
- Free UK Delivery
Select the correct injector for your DFMA engine below
Fits Audi A3, Audi A4, Audi A5, Audi A6 and more
Top injectors for DFMA
Compatible Injectors for DFMA
- OEM Tested
- 12-Month Warranty
- Free UK Delivery
Common problems solved by these injectors
About the DFMA engine
The DFMA is a vw/audi 2.0 tdi (ea288 gen2) common rail diesel engine. This engine uses Bosch diesel injectors.
How Diesel Injectors Are Remanufactured
Watch our 3D walkthrough of the diesel injector remanufacturing process and see how injectors are professionally restored for reliable service.
Vehicles Using DFMA Engine
| Vehicle | Engine | Years |
|---|---|---|
| Audi A3 injector | 2.0 TDI | |
| Audi A4 injector | 2.0 TDI | |
| Audi A5 injector | 2.0 TDI | |
| Audi A6 injector | 2.0 TDI | |
| Audi Q2 injector | 2.0 TDI | |
| Audi Q3 injector | 2.0 TDI | |
| Audi Q5 injector | 2.0 TDI | |
| Audi TT injector | 2.0 TDI |
Common DFMA Injector Problems
Rough idle and engine vibration
Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
Excessive exhaust smoke
Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
Poor fuel economy
A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
Engine misfire under load
Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
Difficult cold starting
Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.
Loss of power
Gradual power loss across the rev range, particularly above 2500 RPM, can indicate injector flow rate degradation.
Increased diesel knock
Louder than normal combustion noise, especially at idle, can indicate incorrect injection timing due to worn injector internals.
DFMA Technical Specifications
Displacement
—
Power
—
Torque
—
Fuel System
Common Rail Direct Injection
The DFMA is a vw/audi 2.0 tdi (ea288 gen2) common rail diesel engine. This engine uses Bosch diesel injectors.
Engine Intelligence
VW / Audi / Škoda / SEAT 2.0 TDI (EA288 Gen2 — A4, A3, Golf, Passat, Tiguan)
Documented failure modes
- Injector delivery drift showing as deviation values out of range
- Injector electrical faults logging cylinder circuit codes
- Leaking or stuck-open injector diluting the engine oil with diesel
Diagnostic guidance
- Log injector correction values in diagnostic software — a large outlier identifies the weak unit
- Check the engine oil for diesel dilution on suspected leaking injectors
- EGR, DPF and fuel-pressure faults overlap with injector symptoms on the EA288 — confirm with leak-back and live rail-pressure data
- Injector coding is required after fitting — follow the manufacturer procedure
Fitment note: EA288 Gen2 2.0 TDI spans many engine codes and outputs, and the 1.6 TDI side of the platform uses different references — always match the number etched on the injector body.
Related DFMA Engine Guides
Related Pages
Bosch VW/Audi 2.0 TDI (EA288 Gen2) — browse compatible engines, vehicles, and injectors
Compatible Engines
Compatible Vehicles
Recommended Injector
0445110470
Bosch — View product page
