Toyota Auris (E150) 2AD-FTV Injectors

Toyota Auris (E150) 2AD-FTV Overview

The Toyota Auris (E150) with the 2AD-FTV 2.2L D-4D engine was produced between 2007 and 2012. This vehicle uses Denso common rail diesel injectors (primary part number 23670-26011) operating at fuel pressures up to 2000 bar. The 2AD-FTV engine in the Toyota Auris (E150) produces and of torque. When replacing injectors on the Toyota Auris (E150) 2AD-FTV, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Toyota Auris (E150)

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other 2AD-FTV Vehicles

Related Pages

Denso 2.2L D-4D — browse compatible engines, vehicles, and injectors