Seat Ateca DLUB Injectors

Seat Ateca DLUB Overview

The Seat Ateca with the DLUB VW/Audi 2.0 TDI (EA288 Gen2) engine was produced between 2016 and 0. This vehicle uses Bosch common rail diesel injectors (primary part number 0445110470) operating at fuel pressures up to 2000 bar. The DLUB engine in the Seat Ateca produces and of torque. When replacing injectors on the Seat Ateca DLUB, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Seat Ateca

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Seat Ateca

Other DLUB Vehicles

Related Pages

Bosch VW/Audi 2.0 TDI (EA288 Gen2) — browse compatible engines, vehicles, and injectors