Peugeot 307 HHDA Injectors

Peugeot 307 HHDA Overview

The Peugeot 307 with the HHDA PSA / Ford / Mazda / Suzuki 1.6 HDi / TDCi engine was produced between 2004 and 2007. This vehicle uses Bosch common rail diesel injectors (primary part number 0445110239) operating at fuel pressures up to 2000 bar. The HHDA engine in the Peugeot 307 produces and of torque. When replacing injectors on the Peugeot 307 HHDA, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Peugeot 307

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Peugeot 307

Other HHDA Vehicles

Related Pages

Bosch PSA / Ford / Mazda / Suzuki 1.6 HDi / TDCi — browse compatible engines, vehicles, and injectors