Peugeot 206 DW10ATED Injectors

Peugeot 206 DW10ATED Overview

The Peugeot 206 with the DW10ATED 2.0L HDi / JTD engine was produced between 1999 and 2007. This vehicle uses Bosch common rail diesel injectors (primary part number 0445110044) operating at fuel pressures up to 2000 bar. The DW10ATED engine in the Peugeot 206 produces and of torque. When replacing injectors on the Peugeot 206 DW10ATED, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Peugeot 206

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Peugeot 206

Other DW10ATED Vehicles

Related Pages

Bosch 2.0L HDi / JTD — browse compatible engines, vehicles, and injectors