Nissan NV300 R9M410 Injectors

Nissan NV300 R9M410 Overview

The Nissan NV300 with the R9M410 Renault/Nissan 1.6 dCi R9M engine was produced between 2016 and 0. This vehicle uses Bosch common rail diesel injectors (primary part number 0445110546) operating at fuel pressures up to 2000 bar. The R9M410 engine in the Nissan NV300 produces and of torque. When replacing injectors on the Nissan NV300 R9M410, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Nissan NV300

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other R9M410 Vehicles

Related Pages

Bosch Renault/Nissan 1.6 dCi R9M — browse compatible engines, vehicles, and injectors