Nissan Juke K9K410 Injectors

Nissan Juke K9K410 Overview

The Nissan Juke with the K9K410 1.5L dCi engine was produced between 2010 and 2014. This vehicle uses Siemens VDO / Continental common rail diesel injectors (primary part number H8200704191) operating at fuel pressures up to 2000 bar. The K9K410 engine in the Nissan Juke produces and of torque. When replacing injectors on the Nissan Juke K9K410, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Nissan Juke

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Related Pages

Siemens VDO / Continental 1.5L dCi — browse compatible engines, vehicles, and injectors