Land Rover Range Rover 306DT Injectors

Land Rover Range Rover 306DT Overview

The Land Rover Range Rover with the 306DT 3.0L V6 TDV6 CR engine was produced between 2013 and 2019. This vehicle uses Bosch common rail diesel injectors (primary part number 0445116051) operating at fuel pressures up to 2000 bar. The 306DT engine in the Land Rover Range Rover produces and of torque. When replacing injectors on the Land Rover Range Rover 306DT, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Land Rover Range Rover

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other 306DT Vehicles

Related Pages

Bosch 3.0L V6 TDV6 CR — browse compatible engines, vehicles, and injectors