Land Rover Range Rover Evoque D240 204DTA Injectors

Land Rover Range Rover Evoque D240 204DTA Overview

The Land Rover Range Rover Evoque D240 with the 204DTA Jaguar / Land Rover 2.0 204DTA engine was produced between 2017 and 2023. This vehicle uses Bosch common rail diesel injectors (primary part number 0445110700) operating at fuel pressures up to 2000 bar. The 204DTA engine in the Land Rover Range Rover Evoque D240 produces and of torque. When replacing injectors on the Land Rover Range Rover Evoque D240 204DTA, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Land Rover Range Rover Evoque D240

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other 204DTA Vehicles

Related Pages

Bosch Jaguar / Land Rover 2.0 204DTA — browse compatible engines, vehicles, and injectors