Kia Rio (JB) D4FA Injectors

Kia Rio (JB) D4FA Overview

The Kia Rio (JB) with the D4FA 1.5L CRDi engine was produced between 2005 and 2011. This vehicle uses Bosch common rail diesel injectors (primary part number 0445110255) operating at fuel pressures up to 2000 bar. The D4FA engine in the Kia Rio (JB) produces and of torque. When replacing injectors on the Kia Rio (JB) D4FA, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Kia Rio (JB)

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other D4FA Vehicles

Related Pages

Bosch 1.5L CRDi — browse compatible engines, vehicles, and injectors