Ford Tourneo Connect R3PA Injectors

Ford Tourneo Connect R3PA Overview

The Ford Tourneo Connect with the R3PA 1.8L TDCi engine was produced between 2002 and 2013. This vehicle uses Siemens VDO / Continental common rail diesel injectors (primary part number A2C59511610) operating at fuel pressures up to 2000 bar. The R3PA engine in the Ford Tourneo Connect produces and of torque. When replacing injectors on the Ford Tourneo Connect R3PA, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Ford Tourneo Connect

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Ford Tourneo Connect

Other R3PA Vehicles

Related Pages

Siemens VDO / Continental 1.8L TDCi — browse compatible engines, vehicles, and injectors