Ford Mondeo DW10C Injectors

Ford Mondeo DW10C Overview

The Ford Mondeo with the DW10C 2.0L HDi engine was produced between 2014 and 2017. This vehicle uses Delphi common rail diesel injectors (primary part number 28388960) operating at fuel pressures up to 2000 bar. The DW10C engine in the Ford Mondeo produces and of torque. When replacing injectors on the Ford Mondeo DW10C, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Ford Mondeo

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Ford Mondeo

Other DW10C Vehicles

Related Pages

Delphi 2.0L HDi — browse compatible engines, vehicles, and injectors