Ford Kuga DW10FD Injectors

Ford Kuga DW10FD Overview

The Ford Kuga with the DW10FD 2.0L HDi engine was produced between 2013 and 2018. This vehicle uses Delphi common rail diesel injectors (primary part number 28388960) operating at fuel pressures up to 2000 bar. The DW10FD engine in the Ford Kuga produces 110–133 kW (150–180 PS) and 370–400 Nm of torque. When replacing injectors on the Ford Kuga DW10FD, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Ford Kuga

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Ford Kuga

Other DW10FD Vehicles

Related Pages

Delphi 2.0L HDi — browse compatible engines, vehicles, and injectors