Ford Ka D13AA Injectors

Ford Ka D13AA Overview

The Ford Ka with the D13AA 1.3L Multijet/JTD/TDCi/HDi/DDiS engine was produced between 2008 and 2014. This vehicle uses Bosch common rail diesel injectors (primary part number 0445110351) operating at fuel pressures up to 2000 bar. The D13AA engine in the Ford Ka produces and of torque. When replacing injectors on the Ford Ka D13AA, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Ford Ka

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Ford Ka

Other D13AA Vehicles

Related Pages

Bosch 1.3L Multijet/JTD/TDCi/HDi/DDiS — browse compatible engines, vehicles, and injectors