Fiat Scudo HHJB Injectors

Fiat Scudo HHJB Overview

The Fiat Scudo with the HHJB PSA / Ford / Mazda / Suzuki 1.6 HDi / TDCi engine was produced between 2007 and 2016. This vehicle uses Bosch common rail diesel injectors (primary part number 0445110239) operating at fuel pressures up to 2000 bar. The HHJB engine in the Fiat Scudo produces and of torque. When replacing injectors on the Fiat Scudo HHJB, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Fiat Scudo

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Fiat Scudo

Other HHJB Vehicles

Related Pages

Bosch 1.6L HDi/TDCi — browse compatible engines, vehicles, and injectors